3M™ Scotchlok™ Insulation Displacement Connectors (IDCs) are easy to use and save time -- to install one, just squeeze -- no stripping or twisting.
Additional Information
The latest series of 3M™ Scotchlok™ Insulation Displacement Connectors (IDCs) has kept all that was good about the original connector - the design, the shape, the element technology and the color-coding. Our unique "U" contact provides a dependable electrical connection. A "live-spring" joint is made by driving the "U" contact down into the connector. As the "U" contact is pressed into
Grease filled. Protects against corrosion in damp conditions. Handles 22-14 AWG solid or stranded wire. Self-stripping U contacts for mechanical strength and electrical conductivity.
22 to 16 (0,5-1,5) AWG, Red. A maximum insulation O.D.diameter of 0.120 inches (3,05 mm) and a operating temperature of 221°F (105°C). Flame retardant. Dual element connection. The suggested application tool for this connector is the E-9BM Crimping Tool.
The UY2's two ports accept any two solid copper conductor combinations of 19-26 AWG (0.9 mm - 0.4 mm) filled or air core cable with a maximum insulation O.D. of .082" (2.08 mm).
Make inline, pigtail and tap splices on solid or stranded wire with no wire stripping. Any auto, truck, boat, trailer or van wiring job can be installed faster and easier with a standard pair of pliers.
This connector has a wire range of 6 AWG. Parellel connectors are similar to butt with overlapped wires and single crimp in center of connector. They are used where space is limited.
This connector has a wire range of 16-14 AWG. This butt connector uses chamfered barrel ends to provide fast easy wire insertion from both ends and a built in wire stop for correct positioning. It must be crimped at ends.
Specially designed for the smaller wire gauges used on todays vehicles. U.L. listed. Permits fast and effective tap wire connections on 22-16 gauge strand or solid wire.
Printer-friendly format