Learn More . . .
		8560 Series CS Cable Breakout Boots - Data Sheet (PDF 61.0 K) Please Note: Adobe® Acrobat® Reader is required to view PDF documents.

Make a Selection

3M™ 3/C Cable Breakout Boots 3M™ 8561 through 8565 Silicone Cold Shrink Cable Breakout Boots are a series of open-ended molded rubber sealing assemblies that are factory expanded and mounted on removable inner-supporting plastic cores to be used on three conductor cable without grounds. It comes 1 per bag and 1 per box.

3M™ 3/C Phase Rejacketing System 3M™ RJS Series Rejacketing Assemblies are a series of silicone rubber insulators incorporating an inner-expandable polyester braid designed to reduce sliding friction and deliver the insulator onto the cable. It comes in 10 bags per box & 10 per case.

3M™ 2252 Cable Grounding Kit 3M™ 2252 Cable Grounding Kit provides a simple yet reliable and secure method for grounding and resealing the jacket of power cables.

3M™ 8473 Hi-Amp Accessory Grounding Kit for 15, 25 and 35 kV 3M™ 8473 Hi-Amp Accessory Grounding Kit is designed to accommodate the grounding of accessories installed on LC, heavy-duty tape and conventional tape-shielded power cables.

3M™ Cold Shrink EC-Series End Caps The 3M™ Cold Shrink EC-Series End Caps environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes.

3M™ GS Series Ground Strap Assembly 3M™ GS series ground strap assembly kit is designed for grounding tape and wire-shielded power cables.

3M™ GSHA-8 QT-II Hi-Amp Grounding Accessory Kit for 15, 25 and 35 kV 3M™ GSHA-8 QT-II termination grounding kit is designed to accommodate the grounding of terminations made on LC, heavy-duty tape and conventional power cables.

3M™ GSK Shield Grounding Accessory Kits 3M™ GSK Shield Grounding Accessory Kits are designed to convert Jacketed Concentric Neutral (JCN) and Concentric Neutral (CN) QT-III termination kits for use on Longitudinally Corrugated (L.C.) and Tape shielded power cables. The GSK kits eliminate the need to stock separate termination kits for shielded power cables.

3M™ HDBB Heat Shrink Heavy Duty Breakout Boot The 3M™ HDBB breakout boots provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. This style is designed for two to six breakouts.

3M™ SG-2 and SG-3 Hi-Amp Splice Grounding Accessory Kit for 15 kV, 25 kV and 35 kV 3M™ SG-2 and SG-3 Hi-Amp Splice Grounding Accessory Kit are designed to accommodate the shielding and grounding of inline splices made on LC, heavy-duty tape and conventional tape shielded power cables.

3M™ Sheath Seal Kits for Multi-conductor Cable 3M™ offers three types of sheath sealing or breakout kits: poured resin, cold shrink and heat shrink. 3M™ offers two types of heat shrink cable sealing and caps and a variety of grounding hardware.

3M™ SKE Heat Shrink Heavy Duty End Caps Heat shrinkable end caps are typically used to seal cable ends and provide mechanical and environmental protection.