Load Control is the process by which a load is monitored and released based on the result of a biological indicator in a test pack. 3M has a full line of steam and EO biological indicators with results in as little as one hour.
A full line of 3M™ Attest™ Incubators provide optimal incubation conditions for accurate readout of 3M™ Attest™ Biological indicators. The system is colour-coded for quick, easy identification.
Starter kit containing biological indicators, incubator, chemical integrators, indicator tape and log book. Used to monitor 121°C(250°F) gravity and 132°C(270°F) steam cycles.
Biological monitoring system for steam sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in 48 hours.
Biological monitoring system for EO sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in 48 hours.
Biological monitoring system for all steam sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in 24 hours.
3M™ Attest™ Rapid Readout Biological Indicators and Test Packs for 250° F/121° C Gravity and 270° F/132(d sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process in three hours.
Rapid readout biological monitoring system for 132°C (270°F) gravity steam sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in one hour.
Each pack consists of a 3M™ Attest™ 1262 Biological Indicator and a 3M™ Comply™ (SteriGage™) Steam Integrator inside a test pack. Presents a challenge to the sterilization process as do the AAMI recommended packs.
Printer-friendly format
