Load Control is the process by which a load is monitored and released based on the result of a biological indicator in a test pack. 3M has a full line of steam and EO biological indicators with results in as little as one hour.
The Attest Auto-reader reads the fluorescence produced by positive 3M™ Attest™ Rapid Readout Biological Indicators to indicate a sterilization process failure.
A full line of Attest incubators that provide optimal conditions for the accurate readout of Attest biological indicators. Attest incubators are available in two sizes, with 14- or 28-vial capacity.
Starter kit containing biological indicators, incubator, chemical integrators, indicator tape and log book. Used to monitor 121°C(250°F) gravity and 132°C(270°F) steam cycles.
Biological monitoring system for EO sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in 48 hours.
Biological monitoring system for all steam sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in 24 hours.
Biological monitoring system for steam sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in 48 hours.
3M™ Attest™ Rapid Readout Biological Indicators and Test Packs for 250° F/121° C Gravity and 270° F/132(d sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process in three hours.
Rapid readout biological monitoring system for 132°C (270°F) gravity steam sterilization cycles. Gives clear, easy to interpret readout of the effectiveness of the sterilization process with results in one hour.
Rapid Readout Biological Indicators and Test Packs that monitor the effectiveness of the EO sterilization process and provide results within 4 hours. Use with 3M™ Attest™ Auto-reader 290G.
