 Printer-friendly format
3M Canada Company
1840 Oxford Street East, Post Office Box 5757
London, Ontario N6A 4T1
Medical Emergency Telephone: (519) 451-2500, Ext. 2222
Transportation Emergency Telephone (CANUTEC): (613) 996-6666
=======================================================================
Material Safety Data Sheet
=======================================================================
Document id : 07-7528-8 Issue date : 2009/04/23
Version : 20.00 Supersedes date : 2006/04/04
Copyright, 1997, 3M Canada Company. All rights reserved. Copying
and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information
is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold
or otherwise distributed with the intention of earning a profit
thereon.
Prepared by: Corporate Regulatory Services, 3M Canada Company
Telephone: (800) 364-3577, Fax: (800) 603-7758, Web Site: www.3M.ca
-----------------------------------------------------------------------
1 Product Identification
-----------------------------------------------------------------------
Tradename:
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG NO.6064 OR 6065)
(INACTIVE)
Product ID:
CS-0406-7058-3 CS-0406-7175-5 62-4662-0921-0 62-4662-0926-9
62-4662-0928-5 62-4662-0933-5 62-4662-2926-7 62-4662-2930-9
62-4662-4030-6 62-4662-4825-9 62-4662-4826-7 62-4662-4835-8
62-4662-4927-3 62-4662-2928-3
Intended Use of Product:
Adhesive;
Division:
Industrial Adhesives and Tapes
-----------------------------------------------------------------------
2 Composition/Information on Ingredients
-----------------------------------------------------------------------
Ingredient Name CAS Number Percentage
------------------------------------- ------------------ -------------
ACETONE 67-64-1 30 - 40
ISOBUTANE 75-28-5 20 - 30
HEPTANE ISOMERS 64742-49-0 20 - 30
PROPANE 74-98-6 7 - 13
NON-VOLATILE COMPONENTS N.J. TRADE Trade Secret 7 - 13
SECRET REGISTRY NO. 04499600-6201P++
NOTE:
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 2 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
NON-VOLATILE COMPONENTS is a non-hazardous Trade Secret material
according to WHMIS criteria.
Each percentage is expressed as the ratio of the weight of the
ingredient to the weight of the controlled product.
-----------------------------------------------------------------------
3 Hazards Identification
-----------------------------------------------------------------------
Critical Hazards:
Aerosol container contains flammable gas under pressure.
Extremely flammable liquid and vapour.
Moderate Eye Irritation: Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
May be absorbed following inhalation and cause target organ
effects.
See Sections 7 and 11 for further information.
-----------------------------------------------------------------------
4 First Aid Measures
-----------------------------------------------------------------------
Instructions for Eye Contact:
Flush eyes with large amounts of water. If signs/symptoms persist,
get medical attention.
Instructions for Skin Contact:
Wash affected area with soap and water. If signs/symptoms develop,
get medical attention.
Instructions for Inhalation:
Remove person to fresh air. If signs/symptoms develop, get medical
attention.
Instructions for Ingestion:
Do not induce vomiting. Give victim two glasses of water. Never
give anything by mouth to an unconscious person. Get immediate
medical attention.
-----------------------------------------------------------------------
5 Fire Fighting Measures
-----------------------------------------------------------------------
Flash point: -45.56 C TCC (propellent)
Lower Explosive Limit (%): Approximately 1.85 % by volume
Upper Explosive Limit (%): Approximately 9.9 % by volume
Autoignition temperature: Not Available
Suitable Extinguishing Media:
Use fire extinguishers with class B extinguishing agents (e.g., dry
chemical, carbon dioxide).
Exposure Hazards during Fire:
Closed containers exposed to heat from fire may build pressure and
explode. Vapours may travel long distances along the ground or
floor to an ignition source and flash back.
Combustion Products from Fire:
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 3 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
Aldehydes - During Combustion;
Carbon monoxide - During Combustion;
Carbon dioxide - During Combustion;
Unusual Fire and Explosion Hazards
None known.
Fire Fighting Procedures:
Water may not effectively extinguish fire; however, it should be
used to keep fire-exposed containers and surfaces cool and prevent
explosive rupture. Wear full protective equipment (Bunker Gear) and
a self-contained breathing apparatus (SCBA).
NFPA: Health 2
NFPA: Fire 4
NFPA: Reactivity 0
NFPA: Unusual Reaction Hazard none
Special Instructions:
Aerosol container contains flammable material under pressure.
-----------------------------------------------------------------------
6 Accidental Release Measures
-----------------------------------------------------------------------
Personal Precautions:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation,
and personal protective equipment. Call 3M-HELPS line
(1-800-364-3577) for more information on handling and managing the
spill.
Spill Response:
Evacuate unprotected and untrained personnel from hazard area. The
spill should be cleaned up by qualified personnel. Remove all
ignition sources such as flames, smoking materials, and electrical
spark sources. Use only non-sparking tools. Ventilate the area
with fresh air. For large spill, or spills in confined spaces,
provide mechanical ventilation to disperse or exhaust vapors, in
accordance with good industrial hygiene practice. Warning! A motor
could be an ignition source and could cause flammable gases or
vapors in the spill area to burn or explode. Contain spill. For
larger spills, cover drains and build dikes to prevent entry into
sewer systems or bodies of water. Cover spill area with a
fire-extinguishing foam. An aqueous film forming foam (AFFF) is
recommended. Working from around the edges of the spill inward,
cover with bentonite, vermiculite, or commercially available
inorganic absorbent material. Mix in sufficient absorbent until it
appears dry. Remember, adding an absorbent material does not remove
a toxic, corrosivity or flammability hazard. Collect as much of the
spilled material as possible using non-sparking tools. Clean up
residue with an appropriate solvent selected by a qualified and
authorized person. Ventilate the area with fresh air. Read and
follow safety precautions on the solvent label and MSDS. Collect
the resulting residue containing solution. Place in a metal
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 4 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
container approved for transportation by appropriate authorities.
Seal the container. Dispose of collected material as soon as
possible.
-----------------------------------------------------------------------
7 Handling and Storage
-----------------------------------------------------------------------
Storage Requirements:
Do not store containers on their sides.
Incompatible Materials:
Store away from heat; Store out of direct sunlight. Store away from
acids; Store away from oxidizing agents.
Ventilation:
No data available.
Fire Prevention:
No smoking while handling this material. Do not spray near flames
or sources of ignition. Aerosol container contains flammable gas
under pressure. Extremely flammable liquid and vapour.
Explosion Prevention:
Keep away from heat, sparks, open flame, pilot lights and other
sources of ignition.
Static Prevention:
Avoid static discharge.
Use Instructions:
Keep container tightly closed. Do not pierce or burn container,
even after use. Avoid contact with oxidizing agents.
-----------------------------------------------------------------------
8 Exposure Controls/Personal Protection
-----------------------------------------------------------------------
Personal Protection
-------------------
Eye Protection:
Avoid eye contact with vapours, mists, or spray. The following
should be worn alone or in combination, as appropriate, to prevent
eye contact: Safety glasses with side shields
Skin Protection:
Avoid prolonged or repeated skin contact. Gloves not normally
required.
Respiratory Protection:
Avoid breathing of vapours, mists or spray. Select one of the
following approved respirators based on airborne concentration of
contaminants and in accordance with regulations: Half facepiece or
fullface air-purifying respirator with organic vapor cartridges.
Ingestion (Prevention):
Do not eat, drink or smoke when using this product. Wash exposed
areas thoroughly with soap and water. Keep out of the reach of
children.
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 5 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
Recommended Ventilation:
Use with functioning spray booth or local exhaust. Use with
appropriate local exhaust ventilation. Do not use in a confined
area or areas with little or no air movement. Use general dilution
ventilation and/or local exhaust ventilation to control airborne
exposures to below Occupational Exposure Limits and/or control mist,
vapour, or spray. If ventilation is not adequate, use respiratory
protection equipment.
Ingredient Exposure Data
------------------------
ACETONE (67-64-1)
LD50 (rat, oral) 5800 mg/kg
LC50 (rat, inhalation/4 hours) 100200 mg/m3
Exposure Limits
ACGIH: TWA 500 ppm (Table A4)
ACGIH: TWA 1780 mg/m3 (Table A4)
ACGIH: STEL 750 ppm (Table A4)
ACGIH: STEL 2380 mg/m3 (Table A4)
ISOBUTANE (75-28-5)
Specific Ingredient Data
No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
ACGIH: TWA 1000 ppm
HEPTANE ISOMERS (64742-49-0)
Specific Ingredient Data
No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
CMRG: TWA 50 ppm
PROPANE (74-98-6)
Specific Ingredient Data
No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
ACGIH: TWA 1000 ppm
NON-VOLATILE COMPONENTS N.J. TRADE SECRET REGISTRY NO. 04499600-6201P++
(Trade Secret)
Specific Ingredient Data
No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 6 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
No data available.
-----------------------------------------------------------------------
9 Physical and Chemical Properties
-----------------------------------------------------------------------
Physical form,Color,Odour: Liquid; Aerosol; Clear; light
yellow colour; mild solvent
odour;
Odour Threshold: No data available.
pH: Not applicable
Boiling point/boiling range: Not applicable
Melting point/melting range: Not applicable
Vapour pressure: Compressed Gas;
Water Solubility: Nil
Specific gravity: 0.673 Water=1
Vapour density: Not available
Volatile organic compounds: Approximately 58 % by weight
Evaporation rate: Not available
Viscosity: Not applicable
Percent Volatile: Approximately 91 % by weight
-----------------------------------------------------------------------
10 Stability and Reactivity
-----------------------------------------------------------------------
Conditions to Avoid:
Store away from heat; Store out of direct sunlight.
Materials to Avoid:
Store away from acids; Store away from oxidizing agents.
Hazardous Decomposition:
Aldehydes - During Combustion;
Carbon monoxide - During Combustion;
Carbon dioxide - During Combustion;
Stability and Reactivity:
Stable. Hazardous polymerization will not occur.
-----------------------------------------------------------------------
11 Toxicological Information
-----------------------------------------------------------------------
Effects from Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
Effects from Skin Contact:
Prolonged or repeated exposure may cause: Mild Skin Irritation:
Signs/symptoms can include localized redness, swelling, and
itching.
Effects from Inhalation:
Upper Respiratory Tract Irritation: Signs/symptoms may include
cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 7 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
May be absorbed following inhalation and cause target organ effects.
Intentional concentration and inhalation may be harmful or fatal.
Effects from Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal
pain, nausea, diarrhea and vomiting.
Sensitization Information:
No data available.
Carcinogenicity:
No data available.
Mutagenicity:
No data available.
Reproductive Effects:
No data available.
Component Based Information:
No data available.
Product Based Information:
No data available.
Other Effects & Information:
Central Nervous System (CNS) Depression: Signs/symptoms may include
headache, dizziness, drowsiness, incoordination, nausea, slowed
reaction time, slurred speech, giddiness, and unconsciousness.
-----------------------------------------------------------------------
12 Ecological Information
-----------------------------------------------------------------------
Environmental Data:
Ecotoxicity Data:
Not determined.
Ecofate Data:
Not determined.
-----------------------------------------------------------------------
13 Disposal Considerations
-----------------------------------------------------------------------
Product as Sold:
Incinerate in a permitted hazardous waste incinerator. As a
disposal alternative, dispose of waste product in a permitted
hazardous waste facility. Facility must be capable of handling
aerosol cans.
Product Packaging:
No data available.
Special Instructions:
Since regulations vary, consult applicable regulations or
authorities before disposal.
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 8 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
-----------------------------------------------------------------------
14 Transport Information
-----------------------------------------------------------------------
Transportation of Dangerous Goods
---------------------------------
TDG Classification: Consumer Commodity
Class/Division: 2.1
Special Information:: Contact 3M for more information.
These transportation classifications are provided as a customer
service. As the shipper YOU remain responsible for complying with
all applicable laws and regulations, including proper
transportation classification and packaging. 3M's transportation
classifications are based on product formulation, packaging, 3M
policies and 3M's understanding of applicable current regulations.
3M does not guarantee the accuracy of this classification
information. This information applies only to transportation
classification and not the packaging, labeling, or marking
requirements. The original 3M package is certified for Canadian
ground shipment only. If you are shipping by air or ocean, the
package may not meet applicable regulatory requirements.
International Dangerous Goods Classification
--------------------------------------------
-----------------------------------------------------------------------
15 Regulatory Information
-----------------------------------------------------------------------
WHMIS Classification: A, B5, D2B
NOTE:
This product has been classified in accordance with the hazard
criteria of the Controlled Products Regulations (CPR) and the MSDS
contains all the information required by the CPR.
Product Certifications:
The product on this MSDS, or all its components, is included on the
following countries' chemical inventories, as noted:
AICS - Australian Inventory of Chemical Substances
DSL - Domestic Substances List (Canada)
TSCA - Toxic Substances Control Act (USA)
3M(TM) SPRAY-MOUNT(TM) ARTIST'S ADHESIVE(CATALOG Page 9 of 9
NO.6064 OR 6065) (INACTIVE)
-----------------------------------------------------------------------
-----------------------------------------------------------------------
16 Other Information
-----------------------------------------------------------------------
Reason for Reissue:
The following Sections and topics have been updated or revised:
Added product id(s) to the MSDS;
Deleted Product I.D.'s
Update Tradename (Obsolete product)
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. 3M MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is
fit for a particular purpose and suitable for user's method of use or
application. Given the variety of factors that can affect the use
and application of a 3M product, some of which are uniquely within
the user's knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or
application.
---End---
|
