 Format d'imprimante convivial
3M Canada Company
1840 Oxford Street East, Post Office Box 5757
London, Ontario N6A 4T1
Medical Emergency Telephone: (519) 451-2500, Ext. 2222
Transportation Emergency Telephone (CANUTEC): (613) 996-6666
=======================================================================
Material Safety Data Sheet
=======================================================================
Document id : 09-4363-9 Issue date : 2008/03/11
Version : 6.00 Supersedes date : 2005/03/10
Copyright, 1997, 3M Canada Company. All rights reserved. Copying
and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information
is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold
or otherwise distributed with the intention of earning a profit
thereon.
Prepared by: Corporate Regulatory Services, 3M Canada Company
Telephone: (800) 364-3577, Fax: (800) 603-7758, Web Site: www.3M.ca
-----------------------------------------------------------------------
1 Product Identification
-----------------------------------------------------------------------
Tradename:
3M 8515 N95 LIGHT WELDING RESPIRATOR
Product ID:
70-0708-9002-8
Intended Use of Product:
RESPIRATOR
Division:
OCCUPATIONAL HEALTH & ENVIRON. SAFETY
-----------------------------------------------------------------------
2 Composition/Information on Ingredients
-----------------------------------------------------------------------
Ingredient Name CAS Number Percentage
------------------------------------- ------------------ -------------
POLYPROPYLENE Not Available 40 - 70
POLYESTER Not Available 10 - 30
POLYISOPRENE, YELLOW Not Available 10 - 17
BROMIDE AND PHOSPHATE SALTS Not Available 5 - 10
ALUMINUM Not Available 5 - 10
ACRYLIC RESIN Not Available 2 - 8
STEEL, CADMIUM FREE Not Available 1 - 5
SILICONE EMULSION Not Available 0.1 - 1.0
BLACK COLOURANT Not Available 0.1 - 1.0
ETHYLENE/ACRYLIC ACID COPOLYMER Not Available 0.1 - 1.0
NOTE:
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 2 of 8
-----------------------------------------------------------------------
The ingredients listed on this MSDS have no known CAS numbers.
Each percentage is expressed as the ratio of the weight of the
ingredient to the weight of the controlled product.
-----------------------------------------------------------------------
3 Hazards Identification
-----------------------------------------------------------------------
Critical Hazards:
None known.
See Sections 7 and 11 for further information.
-----------------------------------------------------------------------
4 First Aid Measures
-----------------------------------------------------------------------
Instructions for Eye Contact:
No need for first aid is anticipated.
Instructions for Skin Contact:
No need for first aid is anticipated.
Instructions for Inhalation:
No need for first aid is anticipated.
Instructions for Ingestion:
No need for first aid is anticipated.
-----------------------------------------------------------------------
5 Fire Fighting Measures
-----------------------------------------------------------------------
Flash point: Not applicable
Lower Explosive Limit (%): Not applicable
Upper Explosive Limit (%): Not applicable
Autoignition temperature: Not applicable
Suitable Extinguishing Media:
Use fire extinguishers with class B extinguishing agents (e.g., dry
chemical, carbon dioxide).
Exposure Hazards during Fire:
No unusual fire or explosion hazards are anticipated.
Combustion Products from Fire:
Aldehydes;
Ketones;
Hydrocarbons;
methane;
Toxic vapours, gases or particulates;
Carbon Monoxide;
Carbon Dioxide;
Under recommended usage conditions, hazardous decomposition
products are not expected. Hazardous decomposition products may
occur as a result of oxidation, heating, or reaction with another
material.
Fire Fighting Procedures:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 3 of 8
-----------------------------------------------------------------------
coat and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.
NFPA: Health 1
NFPA: Fire 1
NFPA: Reactivity 0
NFPA: Unusual Reaction Hazard none
-----------------------------------------------------------------------
6 Accidental Release Measures
-----------------------------------------------------------------------
Personal Precautions:
No data available.
Spill Response:
Not applicable.
-----------------------------------------------------------------------
7 Handling and Storage
-----------------------------------------------------------------------
Storage Requirements:
No data available.
Incompatible Materials:
None known.
Ventilation:
No data available.
Use Instructions:
This product is considered to be an article which does not release
or otherwise result in exposure to a hazardous chemical under
normal use conditions.
-----------------------------------------------------------------------
8 Exposure Controls/Personal Protection
-----------------------------------------------------------------------
Personal Protection
-------------------
Eye Protection:
Not applicable.
Hand Protection:
Not applicable.
Skin Protection:
Not applicable.
Respiratory Protection:
Not applicable.
Ingestion (Prevention):
Not an expected route of exposure.
Recommended Ventilation:
Not applicable.
Ingredient Exposure Data
------------------------
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 4 of 8
-----------------------------------------------------------------------
POLYPROPYLENE (Not Available)
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
POLYESTER (Not Available)
Specific Ingredient Data
No data available. No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
POLYISOPRENE, YELLOW (Not Available)
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
BROMIDE AND PHOSPHATE SALTS (Not Available)
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
ALUMINUM (Not Available)
Specific Ingredient Data
No data available. Not applicable.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
ACRYLIC RESIN (Not Available)
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
STEEL, CADMIUM FREE (Not Available)
Specific Ingredient Data
No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
SILICONE EMULSION (Not Available)
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
BLACK COLOURANT (Not Available)
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 5 of 8
-----------------------------------------------------------------------
No data available.
ETHYLENE/ACRYLIC ACID COPOLYMER (Not Available)
Specific Ingredient Data
No data available.
LD50 (rat, oral) No data available.
LC50 (rat, inhalation/4 hours) No data available.
Exposure Limits
No data available.
-----------------------------------------------------------------------
9 Physical and Chemical Properties
-----------------------------------------------------------------------
Physical form,Color,Odour: Solid; Non-woven material.
Black; No odour;
Odour Threshold: No data available.
pH: Not applicable
Boiling point/boiling range: Not applicable
Melting point/melting range: Not Available
Vapour pressure: Not applicable
Water Solubility: Not applicable
Specific gravity: Not applicable
Vapour density: Not applicable
Volatile organic compounds: Not applicable
Evaporation rate: Not applicable
Viscosity: Not applicable
Percent Volatile: Not applicable
-----------------------------------------------------------------------
10 Stability and Reactivity
-----------------------------------------------------------------------
Conditions to Avoid:
None known.
Materials to Avoid:
None known.
Hazardous Decomposition:
Aldehydes;
Ketones;
Hydrocarbons;
methane;
Toxic vapours, gases or particulates;
Carbon Monoxide;
Carbon Dioxide;
Under recommended usage conditions, hazardous decomposition
products are not expected. Hazardous decomposition products may
occur as a result of oxidation, heating, or reaction with another
material.
Stability and Reactivity:
Stable. Hazardous polymerization will not occur.
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 6 of 8
-----------------------------------------------------------------------
-----------------------------------------------------------------------
11 Toxicological Information
-----------------------------------------------------------------------
Effects from Eye Contact:
No health effects are expected.
Effects from Skin Contact:
No health effects are expected.
Effects from Inhalation:
No health effects are expected.
Effects from Ingestion:
No health effects are expected.
Sensitization Information:
No data available.
Carcinogenicity:
No data available.
Mutagenicity:
No data available.
Reproductive Effects:
No data available.
Component Based Information:
No data available.
Product Based Information:
No data available.
Other Effects & Information:
This product, when used under reasonable conditions and in
accordance with the 3M directions for use, should not present a
health hazard. However, use or processing of the product in a
manner not in accordance with the product's directions for use may
affect the performance of the product and may present potential
health and safety hazards.
-----------------------------------------------------------------------
12 Ecological Information
-----------------------------------------------------------------------
Environmental Data:
Ecotoxicity Data:
Not determined.
Ecofate Data:
Not determined.
Other Effects and Information:
Not determined.
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 7 of 8
-----------------------------------------------------------------------
-----------------------------------------------------------------------
13 Disposal Considerations
-----------------------------------------------------------------------
Product as Sold:
Dispose of used product by the same method as recommended for the
disposal of the substance the respirator was used for.
Product after Use:
Not applicable.
Product Packaging:
No data available.
Potential for Recycling:
Reclaim if feasible.
Special Instructions:
Since regulations vary, consult applicable regulations or
authorities before disposal.
-----------------------------------------------------------------------
14 Transport Information
-----------------------------------------------------------------------
Transportation of Dangerous Goods
---------------------------------
TDG Classification: Non-Regulated Material
Special Information:: Contact 3M for more information.
These transportation classifications are provided as a customer
service. As the shipper YOU remain responsible for complying with
all applicable laws and regulations, including proper
transportation classification and packaging. 3M's transportation
classifications are based on product formulation, packaging, 3M
policies and 3M's understanding of applicable current regulations.
3M does not guarantee the accuracy of this classification
information. This information applies only to transportation
classification and not the packaging, labeling, or marking
requirements. The original 3M package is certified for Canadian
ground shipment only. If you are shipping by air or ocean, the
package may not meet applicable regulatory requirements.
International Dangerous Goods Classification
--------------------------------------------
-----------------------------------------------------------------------
15 Regulatory Information
-----------------------------------------------------------------------
WHMIS Classification: Exempt (Manufactured Article)
NOTE:
This product has been classified in accordance with the hazard
criteria of the Controlled Products Regulations (CPR) and the MSDS
contains all the information required by the CPR.
Product Certifications:
This product is an article as defined by TSCA regulations, and is
3M 8515 N95 LIGHT WELDING RESPIRATOR Page 8 of 8
-----------------------------------------------------------------------
exempt from TSCA Inventory listing requirements.
-----------------------------------------------------------------------
16 Other Information
-----------------------------------------------------------------------
Reason for Reissue:
MSDS review, no information has changed
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. 3M MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is
fit for a particular purpose and suitable for user's method of use or
application. Given the variety of factors that can affect the use
and application of a 3M product, some of which are uniquely within
the user's knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or
application.
---End---
|
