Make a Selection
|
|
3M™ Roloc™ Brake Rotor Surface Conditioning Disc Refill Pack, 01411, 12 per case
Premium 120 grit 3M™ Roloc™ disc designed to create a non-directional scratch pattern on brake rotor surfaces after turning. Refill pack includes twelve Roloc™ Brake Surfacing Discs.
|
|
3M™ Roloc™ Brake Rotor Surface Conditioning Disc Starter Pack, 01410, 12 per case
Premium 120 grit disc designed to create non-directional scratch pattern on brake rotor surfaces after turning on a lathe. Includes nine discs and one pad. Their use helps to reduce squeal and chatter and improve stopping performance.
|
|
3M™ Roloc™ Disc Pad 45090, Soft, 3 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 3 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 45092, 3 inch, Medium, 5 pads per case
Provides high quality, uniform, burr-free finishes and can raise production and quality standards for blending, deburring and finishing of any metal. Max operating speed: 18,000.
|
|
3M™ Roloc™ Disc Pad 45093, Extra Hard, 3 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 3 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 45094, Soft, 2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 45098, Soft, 1 1/2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 1 1/2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 45099, Medium, 1 1/2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 1 1/2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 45100, Hard, 1 1/2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 1 1/2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 45179, Medium, 4 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ 4 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.
|
|
3M™ Roloc™ Disc Pad 83489, Hard, 4 in 5/8 11 Internal, 5 per case
Hard rubber Backup pad designed to support 3M™ Roloc™ 4 inch diameter abrasive discs. This pad has a 5/8-11INT thread which allows it to be mounted directly to tools with 5/8-11 EXT threaded shafts. Large Hex Nut (11/16 inch hex).
|
|
3M™ Roloc™ Disc Pad Assembly 45102, Threaded Shaft, 1/4 inch, 50 per case
This hard rubber back up pad provides firm support for Scotch-Brite™ Roloc™ Surface Conditioning Disc (PNs 07480-07514) and 3M™ Roloc™ Bristle Discs (PNs 18698-18737).
|
|
3M™ Roloc™ Disc Pad TS and TSM 14211, Medium, 2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ TS and TSM 2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck too
|
|
3M™ Roloc™ Disc Pad TS and TSM 14215, Medium, 3 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ TS and TSM 3 inch diameter abrasive discs. Pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts. Or use with Roloc™ shank to fit collet chuck tools.
|
|
|
3M™ Roloc™ Disc Pad TS and TSM 77728, Hard, 1 1/2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ TS and TSM 1 1/2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck
|
|
|
3M™ Roloc™ Disc Pad TS and TSM 77729, Medium, 1 1/2 in 1/4-20 Internal, 5 per case
Backup pad designed to support 3M™ Roloc™ TS and TSM 1 1/2 inch diameter abrasive discs. Pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tool
|
|
3M™ Roloc™ Disc Pad, 05541, 4 in, 10 per case
Backup pad designed to support 3M™ Roloc™ 4 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts. Assembly also includes a Roloc™ shank and adaptor.
|
|
|
3M™ Roloc™ Disc Pad, 45101, Medium, 1 in 1/4-20 Internal, 5 per case
This hard rubber back up pad provides firm support for Scotch-Brite™ Roloc™ Surface Conditioning Discs (PNs 07480-07514) and 3M™ Roloc™ Bristle Discs (PNs 18698-18737).
|
|
3M™ Roloc™ Dust Free Disc Pads 02286, 4 in, 5 per case
PN02286 ROLOC DUST FREE DISC PAD 4 IN
|
