A one way pin is used to lockout an individual circuit located on either the left or right side of the panel. Packaged bulk, 15 per package.

A one way pin is used to lockout an individual circuit located on either the left or right side of the panel. 5 per package

A two way pin is used to lockout two circuits directly opposite each other. 5 per package

A two way pin is used to lockout two circuits directly opposite each other. Packaged bulk, 15 per package.

For PS-MB, used in conjunction with the expanding bracket, this brace is attached to the bracket which is then expanded and attached to the insides of both sides of the panel.

The cup pin is used to secure "on" individual circuits (i.e. dedicated circuits) located on either the left or right side of the panel. 5 per package

When a main breaker lockout cannot be directly attached to the dead front because of extended breaker casing, a pair of expanding brackets must be used. Expanding brackets for PS-MB are sold in pairs only.

The half size spade pin is used to lockout half-size (twin or piggyback) breakers. This pin can lockout an individual circuit by simply rotating the pin 180° for either the top or the bottom breaker. 5 per package

The hook pin can be used to secure "on" individual circuits (i.e. dedicated passive circuits), or to lockout individual circuits from either the left or right side of the panel. Packaged bulk, 15 per package.

The hook pin can be used to secure "on" individual circuits (i.e. dedicated passive circuits), or to lockout individual circuits from either the left or right side of the panel. 5 per package

On large frame breakers where the handle thickness (size) and the ability to mount a standard 3M™ PanelSafe™ unit is not applicable, a main breaker lockout is used either separately or in conjunction with the main breaker brackets.

For side mounting used in conjunction with a 3M™ PanelSafe™ Unit when breakers are recessed below the dead front and no area is available to mount a PanelSafe™ Unit by standard means. Available only in pairs.

For side mounting, used in conjunction with a 3M™ PanelSafe™ unit when breakers are recessed below the dead front and no area is available to mount a PanelSafe™ unit by standard means. Available only in pairs.

Stores all pins, (except main breaker pin) at each panel location for easy access when lockout functions are required.

A main breaker pin is used only with the main breaker lockout on large frame breakers.

On distribution panels where the body of each breaker extends out beyond the level of the dead front, the standard shim is used to raise the surface, where a 3M™ PanelSafe™ unit is mounted, level with the body of each breaker. Sold only in pairs.

On distribution panels where the body of each breaker extends out beyond the level of the dead front. The 1/2" shim is used to raise the surface where a 3M™ PanelSafe™ unit is mounted, level with the body of each breaker. Available only in pairs.

On distribution panels where a raised, rounded bead runs down the center of the dead front; the slotted shim mounts over this bead; primarily GE panels. Provides a flat surface to mount the 3M™ PanelSafe™ unit. Available only in pairs.

A spade pin is used to lockout on either the left or right side of the panel when the measured distance from the center line of the dead front to the max position on the breaker handle in the off position is greater than 2 1/2". Bulk, 15 per package.

A spade pin is used to lockout on either the left or right side of the panel when the measured distance from the center line of the dead front to the max position on the breaker handle in the off position is greater than 2 1/2". 5 per package

Used on distribution panels that have a V-Notch extending down the length of the dead front; primarily ITE panels. Available only in pairs.