Make a Selection
|
|
|
3M™ Abrasive Rolls
|
|
|
3M™ Belts
Sanding belts designed for head resurfacing and crankshaft polishing.
|
|
3M™ Cloth Rolls
Extensive line of cloth utility rolls including Mechanics, Three-M-ite™ Elek-tro-cut™ and Wetordry™ abrasive rolls for metal sanding, deburring, and light clean-up work.
|
|
3M™ Cloth Sheets
Emery cloth, crocus cloth and Elec-Tro-Cut™ cloth sheets for metal sanding, deburring, and light clean-up work.
|
|
|
3M™ Cut-Off/Weld Grinding Wheels
Green Corps[TM] and General Purpose Cut Off Wheels and Green Corps[TM] Reinforced Grinding Wheels.
|
|
3M™ Disc Rolls, Dust Free
Dust free versions of Imperial™ "Purple" Film and Paper, Stikit™ Gold Film, Stikit™ Gold Paper and Stikit™ Green Paper. Pressure sensitive adhesive discs on a roll.
|
|
3M™ Disc Rolls
Imperial™ Stikit™ Purple Paper, Stikit™ Gold Film, Stikit™ Gold Paper and Stikit™ Green Paper. Pressure sensitive adhesive discs on a roll.
|
|
3M™ Discs, Dust Free
Dust free discs for use with dual action or random orbit disc sanders. Available with Stikit™ Hookit™ and Hookit™ II attachment systems.
|
|
3M™ Discs
Stikit™, Hookit™, Hookit™ II and glue-on discs designed for use with dual action or random orbit disc sanders and slow speed polishers. Applications range from coarse grade paint and stock removal to fine grade finishing operations.
|
|
3M™ Fibre Discs
Tough fiber backing provides the support for coarse grinding operations. This includes paint and rust removal, door skinning and weld grinding. Available in 5, 7 and 9 1/8 inch diameters with a 7/8 inch center hole.
|
|
3M™ Sanding Sponges
Available in grades 120-1500, 4-1/2 in X 5-1/2 in sheets-gray in color with a sponge backing. These flexible abrasive coated foam sheets enable users to sand hard-to-reach areas.
|
|
|
3M™ Sheet Rolls
Stikit™ Gold Paper only. Used on file shoes, sanding blocks, or file boards. Pressure sensitive adhesive sheets on a roll. Helps to save paper because you do not have to fold the abrasive. Use 100% of the material.
|
|
3M™ Sheets, Dust Free
Available for dust-free machine sanding, 3M has the product to satisfy your refinishing requirements. Sandpaper sheets are available with the Stikit™, Hookit™ and Hookit™ II attachment systems.
|
|
3M™ Sheets
Available in all sizes for hand or machine sanding, 3M has the product to satisfy your refinishing requirements. Sandpaper sheets are available dry or with the Stikit™, Hookit™ and Hookit™ II attachment systems.
|
|
|
Power Tools & Tool Accessories
3M™ Branded hand held sanders and sander accessories (backup pads, adapters, oil, etc) which allows 3M abrasives to perform at their maximum efficiency.
|
|
Scotch-Brite™ Discs
Scotch-Brite™ Surface Conditioning Discs have applications in the colision repair and mechanical repair businesses. From removing rust and undercoating to gaskets, Scotch-Brite™ makes the job easier and faster.
|
|
Scotch-Brite™ Hand Pads
Scotch-Brite™ Hand Pads are available in a variety of grades that enable scuffing before and after applying primer-surfacer, and prior to clear coat blending.
|
|
Scotch-Brite™ Roloc™ Bristle Discs
Super tough plastic bristle brush, embedded with abrasive, wear as they clean continually exposing fresh abrasive. The ideal tool to replace scrapers, wire wheels and chemical gasket strippers. stops the danger of loose wires flying back at the operator.
|
|
Scotch-Brite™ Scuff Rolls
Scotch-Brite™ material in roll form. 3 pad system for panel surface preparation in the body shop.
|
|
Scotch-Brite™ Scuff Sponges
Three-dimensional, non-woven material laminated to a cellulose sponge material conforms to work areas. Open construction reduces loading. Ideal for scuffing/cleaning in a variety of automotive surfaces.
|
|
Scotch-Brite™ Sheet Rolls
Thin, ultra-conformable, extra sharp and economical Scotch-Brite™ Sheets. Quick scuffing of irregular surfaces. Non-leveling, reusable, use wet or dry. Comes in 8 inch x 20 foot roll with 4 inch x 8 inch perforated sheets.
|
|
Scotch-Brite™ Wheels
Scotch-Brite™ is available in wheel form. It can be used on a bench motor or mounted onto a drill using the 3M™ Roloc™ + Holder 07500.
|
