Learn More . . .
		3M™ Rust Fighter I-Amber Tech Data Sheet - Bulletin (PDF 36.7 K)   3M™ Underseal Brand Undercoating PNs 08881 and 08882 - Brochure (PDF 289.7 K) Please Note: Adobe® Acrobat® Reader is required to view PDF documents.

Make a Selection
	3M™ Automix™ Polyolefin Adhesion Promoter, 05907, 12 oz Net Wt, 6 per case Adhesion promoter to be used with 3M™ Automix™ EZ Sand Flexible Parts Repair Material, part numbers 05895, 05896, and 05887 for the repair of polypropylene and ethylene propylene interior and exterior parts.
	3M™ Body Schutz™ Rubberized Coating Black, 08864, 1 Quart (US), 6 per case Black, rubberized, protective coating developed primarily for use as a sound deadener, protective coating, and underseal. Bonds to a wide variety of surfaces. Use with applicator gun, part number 08997.
	3M™ No Cleanup High Coverage Body Schutz™ Coating, 08964, 22 fl oz, 6 per case Tough, fast drying, paintable, rubberized undercoating material that effectively protects and sound deadens door skins, quarter panels, wheel wells, frame rails, trunks and fenders. Use with 08801 applicator gun.
	3M™ No Cleanup Rocker Gard™ Coating, 08949, 22 fl oz/650 mL, 6 per case Paintable, tough, beige-colored coating designed for use as a rocker panel chip-resistant protective surface. Use wherever stone chip protection is needed. Must be applied over a 2K epoxy primer. Use with 08801 applicator gun.
	3M™ No Cleanup Waterbased Undercoating, 08804, 20 fl oz, 6 per case Superior performing, paintable, rubberized undercoating with excellent coverage and corrosion protection, while also meeting the low VOC requirements in most areas. Use with 3M™ No Cleanup Applicator Gun 08801.
	3M™ Rocker Panel Sprays (Tan & Clear) Tan colored and clear paintable coatings specially formulated to match the fine to medium and medium to coarse textures of factory-applied textured coating on the stone-throw areas of automobiles.
	3M™ Rocker Schutz™ Coating, 08874, 1 Quart (US), 6 per case Fast drying, tintable, paintable, chip resistant coating for use on motor vehicles; resists weathering, salt spray, and abrasion. Texture is coarse. Use with applicator gun, part number 08997.
	3M™ Rust Fighter-I Interior corrosion preventative coating for direct application to Automotive bare or primed metal. Typical areas of applications are door skins, rocker panels, interior quarter panels, etc. Remain soft and pliable and will not crack, chip, or peel.
	3M™ Undercoating, 08881, 16 oz Net Wt/453 g, 6 per case Black, multi-purpose, low cost, aerosol undercoating. Specifically used for undercarriages, wheel wells, frame rails, and fenders. Designed to protect metal from corrosion and abrasion. Can also be used as a sound dampening coating.
	3M™ Underseal™ Rubberized Undercoating, 08883, 1 lb 3.7 oz Net Wt, 6 per case Rapid drying, paintable, rubberized undercoating material for rust-proofing and sound deadening. Ideal for coating fenders, quarter panels, door panels, repaired sections, welded joints, hoods, and decks.
	3M™ Underseal™ Undercoating, 08882, 17 oz Net Wt/481 gr, 6 per case Paintable aerosol undercoating designed to protect surfaces from corrosion and provide sound deadening. Can be applied to bare or primed metal. For painting, let dry for 30 minutes at room temperature or greater than 60 degrees.
	3M™ Weld-Thru Coating II, 05917, 12.75 oz Net Wt/361 g, 6 per case Aerosol coating designed to be applied to metal surfaces prior to welding to provide corrosion protection after welding. Dries fast with minimum spatter. Meets MIR requirements.