|
|
|
3M™ Floor Surfacing Abrasive Discs are the professionals' choice on edger sanding, rotary sanding and three disc rotary sanding machines for commercial and residential jobs. They are available in a wide range of abrasives, sizes and grades.
|
|
|
Make a Selection
|
|
3M™ Between Coats Finishing Disc BCP18CC, 18 in, 10 pk, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Between Coats Finishing Disc, 20 in, 10 pk, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Floor Surfacing Discs 00407, 7 in x .3125 in, 150 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00428, 6.875 in x .875 in, 100 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00429, 6.875 in x .875 in, 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00430, 6.875 in x .875 in, 300 cs 60 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00431, 6.875 in x .875 in, 300 cs 50 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00438, 20 Grit, 16 in x 2 in, 25 case
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00632, 6 in x .3125 in, 100 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00633, 6 in x .3125 in, 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00634, 6 in x .3125, 60 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 02546, 19 in x 2 in, 50 cs 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 02548, 19 in x 2 in, 25 cs 20 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 02617, 7 in x .875 in, 300 cs 150 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 03595, 7 in x .875 in, 80 Grit
A general purpose floor abrasive disc.
|
|
|
3M™ Floor Surfacing Discs 03596, 7 in x .875 in, 60 Grit
A general purpose floor abrasive disc.
|
|
|
3M™ Floor Surfacing Discs 03598, 7 in x .875 in, 36 Grit
A general purpose floor abrasive disc.
|
|
|
3M™ Floor Surfacing Discs 04090, 7 in x .875 in, 120 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 06959, 5 in x .25 in, 6 Slots .5 in length 20 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 06963, 7 in x .3125 in, 120 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07925, 7 in x .875 in, 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07926, 7 in x .875 in, 30 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07936, 7 in x .875 in, 24 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07939, 7 in x .875 in, 40 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07941, 7 in x .3125 in, 24 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07942, 7 in x .3125 in, 30 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07943, 7 in x .3125 in, 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07944, 7 in x .3125 in, 40 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 09181, 16 in x 2 in, 50 cs 120 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 09188, 36 Grit, 6 in x .3125 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20550, 20 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20954, 100 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20955, 80 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20956, 60 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20957, 16 in x 2 in, 50 cs 100 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20958, 16 in x 2 in, 50 cs 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20960, 16 in x 2 in, 50 cs 50 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20961, 16 in x 2 in, 50 cs 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20962, 16 in x 2 in, 50 cs 30 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20969, 100 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20971, 80 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20973, 60 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20978, 15 in x 2 in, 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20982, 100 Grit, 7 in x .875 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20983, 80 Grit, 7 in x .875 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20984, 60 Grit, 7 in x .875 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20985, 50 Grit, 7 in x in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20992, 100 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20993, 80 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20994, 60 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20995, 50 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21016, 100 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21017, 80 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21018, 60 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21019, 50 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21021, 5 in x .25 in, 6 Slots .5 in length 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21027, 16 Grit, 16 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21028, 12 Grit, 16 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21034, 16 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21035, 12 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21037, 16 Grit, 7 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21038, 12 Grit, 7 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21040, 16 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21041, 12 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21043, 16 Grit, 5 in x 1/4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21640, 7 in x .875 in, 200 cs 20 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 22162, 20 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 22164, 20 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 88526, 16 Grit, 6 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 88527, 16 in x 2 in, 50 cs 60 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 88528, 36 Grit, 6-7/8 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Green Corps™ Hookit™ Regalite™ Discs 07950, 7 in, 36E Grit
3M™ Green Corps™ Hookit™ Regalite™ Discs are fast cutting discs that are long lasting. Unique Regalite™ mineral bonded to tough E-weight Hookit™ Backing. Easy-to-change abrasive when using Lagler Trio or Alto 3DS machines.
|
|
|
3M™ Green Corps™ Hookit™ Regalite™ Discs 07951, 7 in, 40E Grit
3M™ Green Corps™ Hookit™ Regalite™ Discs are fast cutting discs that are long lasting. Unique Regalite™ mineral bonded to tough E-weight Hookit™ Backing. Easy-to-change abrasive when using Lagler Trio or Alto 3DS machines.
|
|
|
3M™ Green Corps™ Hookit™ Regalite™ Discs 07952, 7 in, 60E Grit
3M™ Green Corps™ Hookit™ Regalite™ Discs are fast cutting discs that are long lasting. Unique Regalite™ mineral bonded to tough E-weight Hookit™ Backing. Easy-to-change abrasive when using Lagler Trio or Alto 3DS machines.
|
|
|
3M™ Green Corps™ Hookit™ Regalite™ Discs 07953, 7 in, 80E Grit
3M™ Green Corps™ Hookit™ Regalite™ Discs are fast cutting discs that are long lasting. Unique Regalite™ mineral bonded to tough E-weight Hookit™ Backing. Easy-to-change abrasive when using Lagler Trio or Alto 3DS machines.
|
|
|
3M™ Green Corps™ Hookit™ Regalite™ Discs 07954, 7 in, 100E Grit
3M™ Green Corps™ Hookit™ Regalite™ Discs are fast cutting discs that are long lasting. Unique Regalite™ mineral bonded to tough E-weight Hookit™ Backing. Easy-to-change abrasive when using Lagler Trio or Alto 3DS machines.
|
|
|
3M™ Regalite™ Edger Discs, 09155, 36 grit, 6.875 x NH
3M™ Regalite™ Edger Discs are the professionals choice for floor sanding abrasives. Edger discs are easily changed without tools. Provides faster cut and better finishes.
|
|
|
3M™ Regalite™ Edger Discs, 09156, 40 grit, 6.875 x NH
3M™ Regalite™ Edger Discs are the professionals choice for floor sanding abrasives. Edger discs are easily changed without tools. Provides faster cut and better finishes.
|
|
|
3M™ Regalite™ Edger Discs, 09157, 60 grit, 6.875 x NH
3M™ Regalite™ Edger Discs are the professionals choice for floor sanding abrasives. Edger discs are easily changed without tools. Provides faster cut and better finishes.
|
|
|
3M™ Regalite™ Edger Discs, 09158, 80 grit, 6.875 x NH
3M™ Regalite™ Edger Discs are the professionals choice for floor sanding abrasives. Edger discs are easily changed without tools. Provides faster cut and better finishes.
|
|
|
3M™ Regalite™ Edger Discs, 09172, 100 grit, 6.875 x NH
3M™ Regalite™ Edger Discs are the professionals choice for floor sanding abrasives. Edger discs are easily changed without tools. Provides faster cut and better finishes.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09270, 7 in x 7/8 in, 752I, 36 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09271, 7 in x 7/8 in, 752I, 40 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09272, 7 in x 7/8 in, 752I, 50 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09273, 7 in x 7/8 in, 752I, 60 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09274, 7 in x 7/8 in, 752I, P80 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09275, 7 in x 7/8 in, 752I, P100 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09276, 7 in x 5/16 in, 752I, 36 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09277, 7 in x 5/16 in, 752I, 40 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09278, 7 in x 5/16 in, 752I, 50 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09279, 7 in x 5/16 in, 752I, 60 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09298, 7 in x 5/16 in, 752I, P80 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09299, 7 in x 5/16 in, 752I, P100 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09300, 6-7/8 in x 7/8 in, 752I, 36 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09301, 6-7/8 in x 7/8 in, 752I, 40 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09302, 6-7/8 in x 7/8 in, 752I, 50 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09303, 6-7/8 in x 7/8 in, 752I, 60 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09304, 6-7/8 in x 7/8 in, 752I, P80 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09305, 6-7/8 in x 7/8 in, 752I, P100 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09306, 7 in x 7/8 in, 752I, P120 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09307, 7 in x 5/16 in, 752I, P120 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09308, 6-7/8 in x 7/8 in, 752I, P120 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Resin Bond Cloth Disc, 3M777F, 7 in x .875 in, P100YF Grit
3M™ Regalite™ Resin Bond Cloth Discs include a sharp, fast cutting mineral with tough backing. Save time with better value, better finish and longer life.
|
|
|
3M™ Regalite™ Resin Bond Cloth Disc, 3M777F, 7 in x .875 in, P120YF Grit
3M™ Regalite™ Resin Bond Cloth Discs include a sharp, fast cutting mineral with tough backing. Save time with better value, better finish and longer life.
|
|
|
3M™ Resinite™ Floor Surfacing Discs 04133, 17.5 in x 4 in, 60-1/2 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Resinite™ Floor Surfacing Discs 04134, 17.5 in x 4 in, 80-1/0 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Resinite™ Floor Surfacing Discs 21022, 5 in x .25 in, 6 Slots .5 in length 30-2.5 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Resinite™ Floor Surfacing Discs 21026, 16 in x 4 in, 12-4-1/2 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
3M™ Sanding Screen 09182
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency and long life.
|
|
|
3M™ Sanding Screen Discs 06844, 7 in x .3125 in, 100 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 06845, 7 in x .3125 in, 80 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 06846, 7 in x .3125 in, 60 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 06848, 7 in x .875 in, 80 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 06849, 7 in x .875 in, 100 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 06850, 7 in x .875 in, 120 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 07958, 7.875 in x .1875 in, 80 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs 07959, 7.875 in x .1875 in, 100 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Sanding Screen Discs, 7 in x .3125 in, 120 Grit
3M™ Sanding Screen Discs remove raised wood grain in the final sanding stage and scuffing between finish coats. Silicon carbide bonded to an open mesh for less loading, more consistency. Provides a longer life.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 13 in, 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 16 in, BCP 16 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 17 in, 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 19 in, 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
Highland™ Floor Surfacing Discs 03599, 7 in x .875 in, 20 Grit
A general purpose floor abrasive disc.
|
|
|
Highland™ Floor Surfacing Discs 03616, 16 in x 2 in, 80 Grit
A general purpose floor abrasive disc.
|
|
|
Highland™ Floor Surfacing Discs 03617, 16 in x 2 in, 60 Grit
A general purpose floor abrasive disc.
|
|
|
Highland™ Floor Surfacing Discs 03619, 16 in x 2 in, 36 Grit
A general purpose floor abrasive disc.
|
|
|
Highland™ Floor Surfacing Discs 03706, 17 in x 2 in, 36 Grit
A general purpose floor abrasive disc.
|
|
|
Highland™ Floor Surfacing Discs, 100 Grit 03594, 7 in x .875 in
A general purpose floor abrasive disc.
|
|
Printer-friendly format