Make a Selection
|
|
3M™ All Around Autobody Sealant
White, easy to apply sealant that is used for sealing interior and exterior autobody joints and seams. Applies easily and can be smoothed to a featheredge with a wet finger and sets to a firm, tough, rubber-like water resistant bead.
|
|
|
3M™ Automix™ Bare-Metal Seam Sealer
Two-part epoxy with corrosion inhibitors for use on vertical or horizontal bare metal seams. Heavy-bodied, non-sagging, non-flowing, and easy tooling formulation for matching OEM seam sealer appearances. Paintable in 30 minutes, worktime, 10 minutes. No shrinkage or cracking.
|
|
3M™ Automix™ Heavy-Bodied Seam Sealer
Two-part epoxy for use in vertical or horizontal seams to match OEM sealers. Non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime, 10 minutes. No shrinkage or cracking.
|
|
3M™ Automix™ Self-Leveling Seam Sealer
Two-part epoxy designed for roof ditches (door skin hem flanges) and rear body panels, including tail light areas, wheel well flanges, etc. Apply over primed metal, paintable in 30 minutes.
|
|
3M™ Brushable Seam Sealer
Firm setting product for sealing interior and exterior joints. Adheres well to clean, bare metal, primed metal and paint surfaces. Skins over quickly. Low shrinkage. Can be painted within 20 minutes. Excellent tooling and sanding properties.
|
|
3M™ Fast 'N Firm™ Seam Sealer
Firm setting product for sealing interior and exterior joints. Adheres well to clean, bare metal, primed metal and paint surfaces. Skins over quickly. Low shrinkage. Can be painted within 20 minutes. Excellent tooling and sanding properties.
|
|
3M™ Flexiclear™ Body Seam Sealer
High solids clear joint and seam sealer designed to seal interior and exterior joints and seams. Adheres well to clean, bare metal, primed metal and painted surfaces. Clear, non-yellowing.Excellent tooling properties.
|
|
3M™ Heavy Drip-Chek™ Sealer
Heavy-based sealer especially designed for verticle seams. Heavier bodied consistancy. Up to 1/8 inch can be applied easily.This product weathers well and does not deteriorate under sunlight.
|
|
3M™ Seam Sealer Tape and Patch
Rubber backed 20 mil thick tape designed to duplicate the factory appearance and function typically found in door jams and trunk gutters. Immediately paintable.
|
|
3M™ Strip Calk
Soft non-hardening caulking material in one foot lengths for use in all types of seams, joints and openings. This product is easily thumbed into place and smoothed with a finger. It may be painted immediately.
|
|
3M™ Ultrapro™ Autobody Sealant
Clear heavy bodied seam sealer. Quick skinning, fast curing, flexible sealer. Can be used wherever heavy bodied seam sealers are needed. High solids and low shrinkage. Ideal seam sealer where time and speed are important. Paintable in 40 min.
|
|
3M™ Ultrapro™ MSP Seam Sealer
High quality, heavy-bodied, general purpose, moisture-curing seam sealers that are designed for interior and exterior body joints. Adheres well to primed surfaces except acrylic lacquer.
|
|
3M™ Ultrapro™ MSP Sprayable Seam Sealer
3M™ Ultrapro™ MSP Sprayable Seam Sealers are black and gray colored high-performance, general-purpose seam sealers that can be caulked or sprayed. Adheres well to all primed surfaces except acrylic lacquer.
|
|
3M™ Ultrapro™ Urethane Seam Sealer
High solids sealants that are ideal for sealing interior and exterior automotive and RV seams and joints. Available in white and gray colors that when applied are tack free and paintable in 30 min.
|
Printer-friendly format