This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This air deflector is an option for use on any 3M™ Headgear L-Series. In the standard configuration, the airflow is toward the inside of the faceshield lens. With the air deflector, the airflow is redirected towards the face of the user.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This kit is used with the 3M™ Supplied Airline Hose W-3020 and the 3M™ 6000/6000DIN and 7000 Series Full Facepieces. Approved for use in continuous flow and pressure demand applications.

Allows the worker to set the airflow to the most comfortable level. Includes the valve and waist belt. It is strictly a regulator and will not warm or cool supplied air to the worker.

Used to regulate the flow of compressed air to 3M™ Hoods H-Series and Whitecap™ Helmets. It helps create comfortable, positive pressure by allowing the wearer to set the airflow at the desired level.

Used for continuous flow on 3M™ 6000/6000DIN and 7000 Series Full Facepieces. This assembly includes one of each of the following: 3M™ Air Regulating Valve W-3062, 3M™ Airline Adapter W-3187, 3M™ Breathing Tube W-3188, 3M™ Waist Belt W-3217, 3M™ Shoulder Strap W-3229, 3M™ Full Face Plug 7890.

Includes retaining ring screen, disc nut, o-rings, check valve and spring.

This valve is the main component of the 3M™ Air Regulating Valve Assembly V-300. It includes all the components necessary to regulate the airflow to the worker.

This valve is the main component of the 3M™ Air Regulating Valve Assembly V-300SS. It includes all the components necessary to regulate the airflow to the worker.

This is a valve only. It is a replacement part for the 3M™ Air Regulating Valve Assembly W-2907.

Regulates the flow of compressed air to 3M™ Facepieces 7000 Series.

Ideal for use in environments requiring easy decontamination of systems, such as, health care isolation wards and first receiver environments. The system includes three head covers, an easy-to-clean vinyl belt, disposable breathing tube covers and external charge adaptor to allow unit to be used over multiple shifts. Supplied with easily identifiable storage bag.

Includes all the components needed to convert the 3M™ 6000DIN and 7000 Series Facepieces to airline mode. The kit includes the 3M™ Air Regulating Valve Kit W-3061 and the 3M™ Supplied Air Hose W-9435-25.

Includes all the components needed to convert the 3M™ 6000DIN and 7000 Series Full Facepieces to airline mode. The kit includes the 3M™ Air Regulating Valve Kit W-3061 and the 3M™ Supplied Air Hose W-9435-50.

Includes all the components needed to convert the 3M™ 6000DIN and 7000 Series Full Facepieces to airline mode. It includes the 3M™ Air Regulating Valve Kit W-3061 and the 3M™ Supplied Air Hose W-9435-100.

This adaptor fits into the center port of the 3M™ Full Facepiece 7800S or 6000DIN and allows it to be used as a 3M™ Supplied Air Respirator.

This system is lightweight and comfortable. No breathing tubes or hoses are required. Positive pressure helps keep out particles, and keep the faceshield fog-free.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This battery charger will keep the battery properly charged and ready for use.

This battery pack supplies the power to operate the motor blower. The nickel cadmium battery has overcharge protection and provides eight hours of use per charge. It has a life of approximately 1000 charge/discharge cycles.

This belt buckle is a replacement buckle for the following 3M™ Belts: Comfort Belt CB-1000, Decon Belt 520-02-23R01and Decon Belt RBE-BLT. It consists of a single 2 inch buckle.

This assembly is part of the 3M™ Pressure Demand Valve Assembly. The belt clip assembly includes the 3M™ Plug W-1279-2 and airline check valve which connects to the 3M™ Supplied Air Hose W-9435.

Includes the components needed to make a complete 3M™ PAPR System. When combined with the 3M™ Headgear and breathing tube, it provides respiratory protection for a wide range of applications.

Includes the components needed to make a complete 3M™ PAPR System. When combined with the 3M™ Headgear and breathing tube, it provides protection for a wide range of applications.

This PAPR is designed to provide maximum comfort. It offers high airflow to the worker and the comfort belt is adjustable to fit waists from 26 inches to 54 inches.

This NIOSH-approved respirator system includes a comfort belt-mounted PAPR assembly, breathing tube, lightweight headgear with wide-view lens and organic vapor/high efficiency cartridge. It is ideal for use when you need mobility.

These blower plugs are a replacement part for 3M™ Belt-Mounted Powered Air Purifying Respirator Systems. Includes five motor blower plugs and five air outlet plugs.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This breathing tube assembly is used on 3M™ Hoods H-Series that are used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) Systems. Includes 3M™ Breathing Tube H-116, 3M™ Thumbscrew Clamp W-5102-2 and 3M™ Squeeze Clamp W-3222-2

This cover, which can be used to protect the tube and extend the life, is used on breathing tubes used with the hardcap and GVP assemblies.

This breathing tube is used on 3M™ GVP Systems with H Series Hoods.

This breathing tube is used on 3M™ GVP Systems that have 3M™ Full Facepieces 7800S and 6000 DIN Series.

Used with the 3M™ Headgear L-Series. It is attached to the opening on the headgear. The lower end of the breathing tube is attached to the air control device.

This breathing tube is part of the 3M™ Air Regulating Valve Assembly W-3061 which allows the 3M™ Full Facepiece 7800S or the 3M™ Full Facepieces 6000DIN to be operated in airline mode. The breathing tube connects to the 3M™ Airline Adapter W-3187 in the center part of the facepiece.

This tube is part of the 3M™ Low Pressure Connector Kit W-3497 and the 3M™ High Pressure Air Regulating Kit W-3461. Both kits are used on 3M™ Supplied Air Respirator Systems 7000 Series.

Gray vinyl breathing tube is used with 3M™ Hood Supplied Air System H-Series.

This faceshield can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It allows the user to wear prescription glasses for greater comfort and acceptance. It provides bumpcap protection.

This bumpcap is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It is available with an autodarkening lens and other options to enhance productivity and safety. It provides bumpcap protection.

This bumpcap is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It is available with an autodarkening lens for productivity and safety. It provides bumpcap protection.

Replacement part for the 3M™ Bumpcap L-500 Series. This shell is designed to be lightweight and offers no head protection against falling or moving objects.

Used on the 3M™ Headgear L-Series. The kit is used to attach 3M™ Faceshield Assemblies L-130, L-150, L-151, L-153, L-154, L-184 and L-185 to the headgear. This cam allows the faceshield to be positioned as desired.

This suspension snaps to the faceshield allowing the hood to move as the wearer turns. Size can be adjusted to fit individual workers.

Used with the 3M™ Hoods H-410-10/07037(AAD) and H-420-10.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This strap can be used on 3M™ H-Series Hoods that use either a cap suspension or hardhat.

Designed for use with 3M™ Bumpcap Headgear L-500 Series. It helps hold the headgear in place on the user. The chin strap is optional and is not required for safe use of this headgear.

Used with 3M™ Headgear L-700 and L-900 Series. It complies with ANSI requirements for impact and penetration protection. The chin strap helps hold the headgear in place on the user.

Intended to be used with 3M™ Whitecap™ Helmets, Hardcap, Snapcaps and Airhat™ Helmets.

Used where the concentration of liquid aerosols in compressed air are greater than what can be filtered by the 3M™ Compressed Air Filter and Regulating Panel W-2806 alone.

This kit delivers air to both sides of the facepiece for a comfortable and balanced 3M™ Supplied Air Respirator System. The back-mounted arrangement keeps work area open. Includes 3M™ Breathing Tube SA-2600, 3M™ Waist Belt GVP-127 and 3M™ Valve SA-1009.

This kit delivers air to both sides of the facepiece for a comfortable and balanced 3M™ Supplied Air Respirator System. The back-mounted arrangement keeps work area open. Includes 3M™ Breathing Tube SA-2600, Belt GVP-127 and Valve SA-1029.

Used on both the high and low pressure back-mounted combination kits.

This adjustable belt is designed to evenly distribute the weight of a 3M™ GVP-Series Belt-Mounted Powered Air Purifying Respirator (PAPR). It can accomodate waist sizes from 26 inches to 54 inches. The PAPR can be positioned in the back or on either side.

This panel is designed to filter and regulate air being delivered to the supplied air respirator. It has a maximum capacity of 50 cfm at 105 psig. Note: This unit will NOT remove carbon monoxide (CO) from compressed air source.

Used to regulate the flow of compressed air to the 3M™ Hoods H-Series and Whitecap™ Helmets operated in low pressure using the 3M™ Supplied Air Hose W-3020. It can operate on pressures of 4-15 psig with and airflow of 6-15 cfm.

Used with the 3M™ Supplied Air Hose W-3020. It is part of the 3M™ Low Pressure Air Regulating Kit W-3197 which is used in continuous flow and pressure demand applications.

This cover plate, 4-1/2 inches x 5-1/4 inches, is part of the lens stack. It is placed between the lens gasket and the film gasket on the welding lens stack. On the electronic lens stack, it is placed between the lens gasket and the lens.

For all 3M™ Airstream™ High Efficiency Headgear-Mounted PAPRs and R-Series Headgear.

Designed for use with the 3M™ Head Suspension W-2878 and 3M™ Ratchet Suspension W-2879.

A component that is used on the 3M™ Compressed Air Filter and Regulator Panel W-2806.

Includes the 3M™ Air Regulator SA-1009 and Waist Belt GVP-127. Used with breathing tube, facepiece, filters/cartridges and air supply hose, it makes a complete 3M™ Dual Airline Supplied Air Respirator.

This valve is used with 3M™ HIgh Pressure Dual Airline Respirators. It connects the breathing tube and the high pressure supplied air hose. Shipped with industrial interchange fitting.

This kit delivers air to both sides of the facepiece for a comfortable and balanced 3M™ Supplied Air Respirator System. Includes 3M™ Breathing Tube SA-2500, 3M™ Waist Belt GVP-127 and 3M™ Valve SA-1009.

Includes 3M™ Breathing Tube SA-2500, Waist Belt GVP-127 and Air Regulator SA-1029. This kit, with facepiece, filters/cartridges and air hose makes a 3M™ Dual Airline Supplied Air Respirator.

This tube is part of the 3M™ Back-Mounted Adapter Kit SA-2000LP (low pressure).

Includes the 3M™ Dual Airline Connector SA-1029 and the Waist Belt GVP-127. This assembly can be used with any 3M™ Low Pressure Dual Airline Supplied Air Respirator.

This valve is used with 3M™ Low Pressure Dual Airline Supplied Air Respirators. It connects the breathing tube and the low pressure supplied air hose. Shipped with an industrial interchange fitting.

This kit includes Breathing Tube SA-1500, Waist Belt GVP-127 and Air Regulator SA-1009. This kit, with facepiece, filters/cartridges and air hose, makes a 3M™ Dual Airline Supplied Air Respirator.

This kit includes 3M™ Breathing Tube SA-1500, Waist Belt GVP-127 and Connector SA-1029. This kit, with facepiece, filters/cartridges and air hose, makes a 3M™ Dual Airline Supplied Air Respirator.

Used with the 3M™ Dual Airline Front-Mounted Adapter Kit SA-1000LP, Low Pressure.

This lens and adapter is used on the 3M™ L-Series Welding Headgear.

This adapter is used on 3M™ Breathe Easy™ 17 Welding Headgear.

This spring is part of the 3M™ Two-Position Valve Assembly W-3231.

This valve is part of the 3M™ Two Position Valve Assembly W-3231.

A durable rubber faceseal for use with the 3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) Systems AS-400 LBC and AS-600 LBC.

Used on 3M™ Headgear L-500 and L-700 Series. This item is used in applications with high temperatures or when sparks or molten metal may be present.

Used on 3M™ Bumpcap L-501/37008(AAD). This faceseal material is designed for applications such as spray painting. It attaches to the extender on the wide view faceshield.

Used with 3M™ Headgear L-500 and L-700 Series. This faceseal material is designed for applications with high temperature or where sparks or molten metal may be present.

This brim is used on 3M™ Whitecap™ Helmets W-8000 and W-8200.

This clip is used on all 3M™ Whitecap™ Helmets.

This cover helps keep the lens on the 3M™ H-Series Hoods clean. When vision becomes obstructed, the cover can be peeled off leaving a clean shield.

This cover helps keep the lens on the 3M™ H-Series Hoods clean. When vision becomes obstructed, the cover can be peeled off leaving a clean shield.

This cover is used on 3M™ Whitecap™ Helmets W-8000 to protect the faceshield from damage.

This cover is used on 3M™ Whitecap™ Helmets W-8000 to help keep the faceshield clean.

Used on the 3M™ Whitecap™ Helmet W-8100B. This cover provides excellent vision and helps keep the faceshield clean.

Used on the 3M™ Whitecap™ Helmet W-8100B. This cover provides excellent vision and helps keep the faceshield clean.

Protective covers for the Snapcap and Hardcap faceshields.

Used with 3M™ Hardcap Assemblies. This cover is 5 1/2 inches x 10 1/2 inches and helps prevent scratching of the faceshield.

This assembly is used on the 3M™ Whitecap™ Helmet W-8100B. It attaches to the helmet and holds the outer faceshield.

This gasket is used on the 3M™ Whitecap™ Helmet W-8100B. It provides a seal between the faceshield and the faceshield frame to prevent entry of airborne particles.

This kit is used on 3M™ Whitecap™ Helmets W-8000. It holds the faceshield to the helmet and allows it to pivot up and down. It includes two of each: pivots, knobs, friction washers and mounting screws.

This gasket, 4 1/2 inches x 5 1/4 inches is part of the welding lens stack. It is placed between the cover plate and the glass shade lens to prevent glass breakage due to heat buildup. The gasket is not used with the electronic lens.

Aluminum filter bowl used with the 3M™ Compressed Air Filter and Regulator Panel W-2806 for pressures less than 250 psig. For industrial applications and environments where chemicals or synthetic lubricants are present.

The filter assembly reduces the amount of particles that may be present in the compressed air system, including water and oil mist. The treated carbon in the filter material helps to lower nuisance level odors.

This filter cover is a replacement part for 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) Systems.

Used on the 3M™ Face-Mounted Powered Air Purifying Respirator (PAPR).

Used on the 3M™ Face-Mounted Powered Air Purifying Respirator (PAPR).

Used on 3M™ Airstream™ Powered Air Purifying Respirator (PAPR) Systems. This component holds the filter in place inside the headgear.

This filter housing assembly with an aluminum filter bowlis used with the 3M™ Compressed Air Filter and Regulator Panel W-2806. For industrial applications and environments where chemicals or synthetic lubricants are present.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This plug is a replacement part for 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) Systems.

This adapter determines airflow for the 3M™ Headgear L-Series and the GVP Series Powered Air Purifying Respirator (PAPR)s.

This meter measures the system airflow to make certain that it is at the proper level for the headgear and cartridges being used.

Used on the 3M™ L-Series Headgear L-700 and L-900. It is installed into the headgear shell before the head suspension is installed. With this foam liner, the headgear is ANSI Class I, II approved for top and side impact.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This assembly is used on the 3M™ Whitecap™ Helmet W-8100B. It holds the faceshield frame to the helmet and provides support for the outer faceshield.

This washer is used with the faceshield mounting kit on 3M™ Whitecap™ Helmets W-8000 and W-8200.

This kit consists of gasket, fasteners and strap. It is used on 3M™ Whitecap™ Helmets.

This kit is used on all 3M™ Whitecap™ Helmets.

This hood is a replacement part for 3M™ Hood Assembly H-912.

This hood is a replacement for the 3M™ Hood Assembly H-922.

This kit is used to convert a GVP System into a NiMH (non-I.S.) System benefiting from improved battery management. The upgrade kit includes 3M™ Battery BP-15, Smart Battery Charger BC-210 and Power Cord GVP-210.

Used on 3M™ Headgear L-Series. It holds the head pad securely and is attached to the headband which is part of the 3M™ Head Suspension Assembly L-113.

This hardhat is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It can be used in applications where ANSI Type I, II hardhat protection is needed. It has an assigned protection factor of 25 x PEL.

This hardhat can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It is designed for welding operations which must have industrial protective headgear. It has an assigned protection factor of 25 x PEL.

This hardhat can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. Meets ANSI Type I, II requirements for industrial protective headgear. It has an assigned protection factor of 25 x PEL.

Replacement part for the 3M™ Hardhat L-700 Series. The shell meets ANSI requirements for industrial protective headgear. The shell is intended to be used in applications in which some head protection is required.

When used with the 3M™ Head Suspension W-2878, the 3M™ Hatshell W-3258 meets the requirements of ANSI standard Z89.1-2003, Type 1, Class E head protection.

Can be used with any 3M™ Headgear L-Series. It protects against the buildup of particles on the outside surface of the headgear shell. This is a disposable item and should be discarded when damaged or soiled.

Used on 3M™ Headgear L-Series. The head pad is part of the 3M™ Head Suspension and is attached to the hanger suspension. The pad adds to user comfort.

Used on the 3M™ L-Series Bumpcap L-500. It is used to help prevent leaks around the headgear. The seals are installed into the bottom edge of the headgear and should not be removed unless they need to be replaced.

Designed for use with 3M™ L-Series Headgear. The complete assembly includes the chin strap L-112 (optional), sweat pad L-115-10/37010(AAD), head pad L-116, hanger suspension L-117 and headband.

Designed to be used with 3M™ H-Series Hoods, Whitecap™ Helmets and Hardcap Assemblies.

This screen is used on the 3M™ Whitecap™ Helmet W-8100B. It provides extra protection in heavy duty blasting applications.

Used with 3M™ Whitecap™ Abrasive Blasting Helmets W-8100. This shroud is made for applications such as shot blasting where extra protection is needed.

This bag is designed for all 3M™ Whitecap™ Helmets. It provides an easy way to store and transport helmets.

This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It meets ANSI Type I, II hardhat requirements. It has shroud options and provides an assigned protection factor of 1000 x PEL.

This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It meets ANSI Type1, II hardhat requirements. It has shroud options and provides protection up to 1000 x PEL.

Designed for use with 3M™ Helmet L-900 Series. This shell meets both ANSI and CSA Class G standards for industrial headgear protection. This shell is for use in applications in which top and side impact may occur.

Used on 3M™ Airstream™ High Efficiency Headgear System to help filter contaminants before the air reaches the workers breathing zone.

Used on 3M™ Airstream™ High Efficiency Headgear System to help filter contaminants before the air reaches the workers breathing zone.

Replacement filter for the 3M™ Coalescing Filter Assembly W-3012/37008(AAD).

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

Used on 3M™ Face-Mounted Powered Air Purifying Respirator (PAPR) Systems W-3265S and W-3275S-L.

This faceshield is used on 3M™ Whitecap ™ Helmets W-8000. It can withstand a continuous temperature of 225°F, 325°F intermittent (107°C, 163°C intermittent) making it usable for work in unusually hot environments.

This shield, 4 1/2 inches x 5 1/4 inches, can be used with 3M™ Headgear L-505, L-705 and L-905. It is used to improve protection against radiated high temperatures of welding operations.

This pin is used on the 3M™ Whitecap™ Helmets W-8100.

This assembly can be used on 3M™ Belt-Mounted Powered Air Purifying Respirators (PAPR)s and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses.

This assembly can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR)s and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses.

This assembly can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR)s and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses.

Can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR)s and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses.

H-Series hoods provide head and neck protection from pesticide and chemical overspray, lightweight, loose fitting, for use with belt-mounted PAPRs or supplied air components. This hood is a replacement for 3M™ Hood Assemblies H-411 and H-412.

This hood is a replacement part for 3M™ Hood Assemblies H-421 and H-422.

This faceshield is used on all 3M™ Whitecap™ Helmets. It is mandatory for use in all abrasive blasting applications.

This assembly is used on all 3M™ Whitecap™ Helmets.

Used with the 3M™ Headgear L-900 Series. It is zipped onto the inner part of the 3M™ Leather Welding Shroud L-127. It can be zipped out for washing.

This shroud is used on the 3M™ Whitecap™ Helmet W-8000.

This shroud is used on 3M™ Whitecap™ Helmets W-8000 and W-8100.

This gasket is used on the electronic lens kit on the 3M™ Breathe Easy™ 17 Welding Headgear.

Used on 3M™ Wide View Faceshield L-130. The kit includes the knob and the pivot post on which the faceshield pivots when raised, lowered and repositioned.

Used on the 3M™ Wide View Faceshield L-130. The faceshield attaches to the headgear using the postioning cam mechanism that is secured by the knob to each side of the headgear.

Used to hold the 3M™ Wide View Lens L-131 and L-132 in place in the 3M™ Wide View Faceshield Assembly L-130. The latch kit makes it easy to remove and replace the wide view lens.

This assembly is used on the 3M™ Whitecap™ Helmet W-8100B. It attaches to the helmet and holds the faceshield frame in place.

Used with the 3M™ Wide View Lens. The cover fits over the lens and protects it from scratching or overspray of paint and chemicals. Up to five covers can be attached, one on top of the other.

Used with the 3M™ Wide View Lens. The cover fits over the lens and protects it from scratching or overspray of paint and chemicals. Up to five covers can be attached, one on top of the other.

This assembly is approved for supplied air systems that use 3M™ Low Pressure Hoses W-3020-25/07033(AAD), W-3020-50/07034(AAD), and W-3020-100/07035(AAD) at pressures between 6-15 psig. It includes the connector and waist belt.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This assembly includes a high performance motor. It is designed to generate more airflow to the wearer. Can be used with the 3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) SystemS AS-400 LBC and AS-600LBC, Intrinsically Safe.

Provides the seal that allows the motor blower to provide proper air flow to the user. It includes five inlet and five outlet.

Replacement part for 3M™ Air Regulating Valve Assembly V-300, V300SS and 3M™ Low Pressure Connector Assembly V-400.

This nut base is a component of the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.

This faceshield is used on 3M™ Whitecap™ Helmets W-8200 for work in most industrial applications.

This cover is used on the 3M™ Whitecap™ Abrasive Blasting Helmet Assembly W-8100B, Black. Provides excellent vision and is easy to replace.

This plug is an industrial interchange standard fitting used for air control valves. It is a 1/4 inch MPT high pressure plug made of steel.

Used on the 3M™ Supplied Air Hose W-3020. It has a 3/8 inch FPT fitting.

This plug is a standard fitting that is used as a quick connect/disconnect on high pressure hoses. It has a 1/4 inch FPT and is made of steel.

This plug, for the air control valves, is a high pressure, 1/4 inch MPT steel fitting.

This plug is a low pressure, 3/8 inch FPT twist lock steel and brass fitting. It may be used on the 3M™ Supplied Air Hose W-3020.

Used on the 3M™ Connector W-3195, Low Pressure, which is used with the 3M™ Supplied Air Hose W-3020, Low Pressure. It has a 1/4 inch MPT steel fitting.

Used with the 3M™ Connector W-3195, Low Pressure, which is used on the 3M™ Supplied Air Hose W-3020. It has a 1/4 inch MPT steel fitting.

This plug is a high pressure hose plug that may be used on the 3M™ Supplied Air Hose W-9435 or W-2929. It is a 1/4 inch FPT brass fitting.

Provides the necessary connection between the battery and the motor blower.

This power cord for GVP systems is for use with the 3M™ Battery Pack BP-15.

This is a polycover to protect the 3M™ Belt-Mounted PAPR and battery from particles. Designed to be used with the 3M™ Belt-Mounted PAPR Assemblies GVP-1 and GVP-1U.

Provides a level of air flow that surpasses NIOSH requirements. Depending on headgear and cartridge, the airflow ranges from 7.0-9.5 cfm. This unit weighs only 1.1 pounds and has a life of about 1000 hours.

This prefilter is a component that fits into the headgear of 3M™ Airstream™ Powered Air Purifying Respirator (PAPR) Systems and helps filter contaminants before they reach the filter.

Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This kit is a part of the 3M™ Ratchet Suspension W-2879. It attaches to and can be used to adjust the size of the 3M™ Head Suspension W-2878 used in 3M™ Helmets and Hoods.

An optional item that makes adjustment of the 3M™ Head Suspension W-2878-2 easier and faster. The ratchet band is easy to install and includes a comfortable foam pad.

This breathing tube is a replacement part for 3M™ H-Series Hoods and GVP PAPR.

This clip is used to hold the electronic lens kit in place on 3M™ Breathe Easy™ 17 Welding Headgear.

This carbon monoxide(CO) monitor is designed to connect directly to the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This safety plate is used on the electronic lens kit on the 3M™ Breathe Easy™ 17 Welding Headgear, 3M™ Headgear L-Series, and 3M™ Full Facepiece 7800S.

This safety plate, 4-1/2 inches x 5-1/4 inches, is used in the welding lens stacks that use shade glass. It is placed on the outside nearest the wire clip that securely holds all parts of the stack in place. The plate is ANSI approved.

This plug is a high pressure, 1/4 inch FPT twist lock steel fitting. May be used on the 3M™ Supplied Air Hose W-9435 or W-2929.

Can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses.

Can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses.

This is a replacement part for 3M™ Hood Assemblies H-611 and H-612.

This vinyl shoulder strap is an optional component of 3M™ GVP Systems. It supports and balances the battery pack and motor blower.

This web shoulder strap is a component of 3M™ GVP Systems. It supports and balances the battery pack and motor blower.

Used on 3M™ Pressure Demand Systems 7800S and 6000PD. It attaches to the waist belt to hold it comfortably in place on the wearer. This strap is made of vinyl.

This cover is an optional component for 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) Systems.

This assembly includes the 3M™ Shroud Clamp W-8061. The shroud is used with 3M™ Whitecap™ Helmets W-8000. It is vinyl coated for durability.

This assembly includes the 3M™ Shroud Clamp W-8061. The shroud provides added protection for certain applications. It is used on 3M™ Whitecap™ Helmet W-8000.

This clamp is used on all 3M™ Whitecap™ Helmets to hold the shroud in place on the helmet. It can be reused with replacement shrouds.

Used with the 3M™ Headgear L-900 Series. This shroud is not intended for welding applications or where high heat or sparks are expected. It drapes over the worker for safety purposes.

Used with the 3M™ Headgear L-900 Series. This shroud is designed for welding applications or where high heat or sparks are expected. It drapes over the worker for safety purposes.

Used with the 3M™ Headgear L-900 Series. This shroud may be used in place of the 3M™ Shroud L-123-2, Tychem® QC. It drapes over the worker for safety purposes.

This shroud is used on 3M™ Whitecap™ Helmets W-8000. Shroud only. It is vinyl coated for durability and can be used for many applications.

This shroud is used on 3M™ Whitecap™ Helmets W-8000 and W-8100 for applications which require added protection. Shroud only. It is vinyl coated for durability.

This assembly includes the 3M™ Chin Strap W-2913. It is used with the 3M™ Snapcap Hood Assembly W-3259 and can be adjusted for wearer comfort.

This socket dust cap helps protect high pressure compressed air hoses. Also used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This socket is a standard fitting used with the 3M™ Compressed Air Filter and Regulator Panel W-2806. It is a 3/8 inch MPT high pressure socket made of brass.

A high pressure, 3/8 inch MPT twist lock fitting that is used on the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This socket is a high pressure, 1/4 inch FPT brass fitting. This fitting is used on the 3M™ Supplied Air Hose W-9435 and W-2929.

This socket is a high pressure, 1/4 inch FPT twist lock steel and braas fitting. It is used on the 3M™ Supplied Air Hose W-9435 or W-2929.

This twist lock socket is a low pressure steel and brass fitting. It is used on the 3M™ Supplied Air Hose W-3020.

This socket is used on the 3M™ Supplied Air Hose W-3020, Low Pressure. It is a 3/8 inch FPT brass fitting.

A fitting used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.

This socket is a high pressure hose socket that may be used on the 3M™ Supplied Air Hose W-9435 and W-2929. It is a 1/4 inch FPT brass fitting.

A high pressure socket used on the 3M™ Compressed Air Filter and Regulator Panel W-2806. It is a 3/8 inch MPT brass fitting.

Replacement headband, complete with mounting hardware. For use with 3M™ Speedglas™Helmets Utility and 9000 Series.

Replacement helmet silver front panel for 3M™ Speedglas™ Helmets Utility, 9000 Series, ProTop System and 9000HWR assembly.

This clamp is used to secure the breathing tube on the 3M™ Hardcap Assembly.

Can be used on 3M™ High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

Can be used on 3M™ High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

Can be used on 3M™ High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

Can be used on 3M™ High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with stainless steel fittings. Coiled hoses may be used in single length only. They cannot be combined.

Can be used on 3M™ Low Pressure Compressed Air Systems. It has a 1/2 inch inner diameter and is equipped with MPT's on both ends to accept 3/8 inch FPT fittings. This hose can only be used in single lengths. Hoses cannot be combined.

Can be used on 3M™ Low Pressure Compressed Air Systems. It has a 1/2 inch inner diameter and is equipped with MPT's on both ends to accept 3/8 inch FPT fittings. This hose can only be used in single lengths. Hoses cannot be combined.

Can be used on 3M™ Low Pressure Compressed Air Systems. It has a 1/2 inch inner diameter and is equipped with MPT's on both ends to accept 3/8 inch FPT fittings. This hose can only be used in single lengths. Hoses cannot be combined.

This hose is 25 feet long and has a 3/8 inch inner diameter. It is equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings. You may not combine 25 or 50 foot lengths of the 3M™ Supplied Air Hose W-9435.

This hose is 50 feet long and has a 3/8 inch inner diameter. It's equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings. You may not combine 25 or 50 foot lengths of the 3M™ Supplied Air Hose W-9435.

This hose is 100 feet long and has a 3/8 inch inner diameter. It is equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings. 3M™ Supplied Air System approvals allow for 100 foot lengths of this hose to be combined up to a maximum of 300 feet. (3 sections)

This 25 foot, 3/8 inch inner diameter (ID) hose is used on 3M™ Supplied Air Respirator Systems. Do not combine 25 or 50 foot lengths of this hose. Shipped with Schrader fittings.

Used on the 3M™ L-Series Headgear, H-Series Hood, Whitecap™ Helmets and Hardcap Assembly. The sweat pad attaches to the headband in the area of the users forehead. It helps absorb perspiration and adds to the overall comfort of the user.

This clamp is used on 3M™ Whitecap™ Helmets.

This assembly is part of the 3M™ Pressure Demand Kit W-3237. It includes the 3M™ Exhalation Valve Spring W-3233 and the 3M™ Exhalation Valve W-3234. It allows the wearer to switch between negative pressure and pressure demand modes.

This visor has anti-fog and scratch-resistant properties built-in. It can be used with the 3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) System AS-200LBC, AS400LBC and AS-600LBC. It is a great solution for hot, humid envi

This assembly is for the 3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) Systems.

This assembly helps regulate the flow and temperature of the supplied air system. It keeps the worker comfortable by heating air by as much as 50°F (28°C). This assembly includes the heating tube, waist belt and holder.

Used to regulate the airflow and to heat the compressed air to 3M™ Hoods H-Series and Whitecap™ Helmets. This NIOSH approved assembly helps create a more comfortable work environment for the user.

This tube is a component of the 3M™ Vortemp™ Heating Assembly V-200. It connects directly to the supplied air system and heats the air before it gets to the workers breathing area.

This tube with stainless steel fittings is a component of the 3M™ Vortemp™ Heating Assembly V-200SS. It connects directly to the supplied air system and heats the air before it gets to the workers breathing area.

This tube is part of the 3M™ Vortemp™ Heating Assembly W-2863, which is used to regulate the flow and temperature of compressed air to 3M™ Hoods and Helmets.

W-3017 Vortemp Holder Kit

This kit is a component of 3M™ Vortemp™ Heating Assemblies V-200 and V-200SS, V-300, V-300SS and V-400. It includes a retainer that holds it in place in the assembly.

This tube is used with the 3M™ Vortemp™ Heating Assembly W-2863.

This kit has the necessary items to maintaing the 3M™ Vortemp™ Heating Assembly V-200.

W-3035 Vortemp Spare Parts Kit

This cap is a component that is used on the 3M™ Vortemp™ Heating Assembly W-2863.

This tube is part of the 3M™ Vortex Cooling Assembly W-2862 which is used to regulate the flow and cool the temperature of compressed air being supplied to hoods and helmets.

This kit includes all the components necessary to convert the 3M™ Vortex Cooling Assembly W-2862 to the 3M™ Vortex Cooling Assembly V-100.

This assembly helps regulate the flow and temperature of the supplied air system. It helps keep the worker comfortable by cooling the air by up to 50°F (28°C). Includes the cooling tube, waist belt and holder.

Used to regulate the flow and cool the compressed air to 3M™ Hoods H-Series and Whitecap™ Helmets. This NIOSH approved assembly helps create more comfortable positive pressure for the user.

Designed to be used with 3M™ Helmets W Series and Hoods H Series. Cools supplied air by as much as 50°F (28°C). There are no moving parts in the assembly thus eliminating maintenance. Includes 3M™ Vortex Air Cooling Tube W-6804, 3M™ Wa

This tube is the component of the 3M™ Vortex Cooling Assembly V-100 . It helps keep the worker comfortable by cooling the air by up to 50°F (28°C) before it gets to the workers breathing area.

This tube with stainless steel fittings is the component of the 3M™ Vortex Cooling Assembly V-100SS. It helps keep the worker comfortable by cooling the air by up to 50°F (28°C) before it gets to the workers breathing area.

To be used with the 3M™ Vortex Cooling Assembly W-2862SR.

This kit is a component of 3M™ Vortex Cooling Assemblies V-100 and V-100SS. It includes a retainer that holds it in place in the assembly.

This kit has the necessary items to maintain the 3M™ Vortex Cooling Assembly V-100. Includes o-rings, special washer, generator, screws, lock washer and foam pad and fastener.

W3033 Spare Parts Kit

This vinyl belt is an optional component of 3M™ GVP Systems.

This belt is supplied as part of the 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR) Assembly GVP-1. It is designed to hold the motor blower unit and battery pack in place.

Used with the 3M™ W-Series and V-Series Air Control Valves.

This belt is part of the 3M™ Continuous Flow, Pressure Demand and the Face-Mounted Powered Air Purifying Respirator (PAPR) Systems. It is adjustable to fit most sizes. Along with the belt clip assembly, it holds the supplied air hose in place. It is made of a black vinyl material to resist contaminants.

Used with the 3M™ Headgear L-Series (except the L-900 Series Headgear). It is attached to the headgear by two matching 3M™ Scotchmate™ Hook-and-Loop Fasteners and drapes over the worker for safety purposes.

This gasket, 4 1/2 inches x 5 1/4 inches, is a component of the welding lens stack. It fits into the lens frame and the other parts of the stack fit over the gasket.

Used on the 3M™ Welding Faceshield and Combination Faceshield. The kit includes the 3M™ Welding Knob L-145 and the pivot post on which the faceshield pivots when raised, lowered and repositioned.

Used on the 3M™ Welding Shields L-150 and L-151 and also in the 3M™ Combination Faceshields L-153, L-154, L-184 and L-185. This knob secures the cam mechanism which is attached to the headgear.

Used to hold all components of the lens stack securely in place. The retainer pivots at one end and can be lifted to replace parts. When closed it fits into slots on the lens frame.

This shield, 4-1/2 inches x 5-1/4 inches, is designed for use with the 3M™ Bumpcap L-503 and Hardhat L-703. It attaches to the headgear with a positioning cam that is secured by a spring-loaded knob on each side of the headgear.

This welding shield, 4 1/2 inches x 5 1/4 inches, is designed for use with the 3M™ Bumpcap L-505, Hardhat L-705 and Helmet L-905. It attaches to the headgear with a positioning cam that is secured by a spring-loaded knob on each side of the headgear.

Used with the 3M™ Headgear L-900 Series. This heavy duty shroud is intended for use in welding applications or where high heat or sparks are expected. It drapes over the worker for safety purposes.

This assembly is designed for abrasive blasting. The double faceshield design helps protect the face and eyes from airborne particles. The outer shell is constructed of polyethelene. The helmet is black.

This guide is used on all 3M™ Whitecap™ Helmets.

Gray vinyl breathing tube used on 3M™ Whitecap™ Helmets. It attaches at the back of the helmet and to the air regulating valve and carries the air into the helmet environment for user comfort.

This kit is used on all 3M™ Whitecap™ Helmets.

Used with the 3M™ L-Series Headgear. It is a general purpose faceshield which should not, by itself, be used for welding applications. It attaches to the headgear using a positioning cam mechanism.

Attaches to the 3M™ Wide-view Faceshield Assembly L-130. The 3M™ Faceseal L-121 attaches to the extender for spray painting or where there is general particulate exposure.

Used on the 3M™ Headgear L-Series. This lens is part of the 3M™ Wide-view Faceshield Assembly L-130. It can easily be removed and replaced with a new lens when damaged.

Used on the 3M™ Headgear L-Series. This lens is part of the 3M™ Wide-view Faceshield Assembly L-130. It can easily be removed and replaced with a new lens when damaged.