Slow drying, easy spreading putty. Provides more working time than 3M™ Acryl-Green Spot Putty, part number 05960. Recommended for filling minor low areas and deeper sand scratches. Loads paper less and can be sanded in 30 minutes.

Fast drying, easy sanding putty designed for spotty repairs. Spreads very easily. Loads paper less and can be sanded in 10 to 15 minutes.

Designed specifically for the boat repair market, this putty is recommended for filling pinholes, scratches and other surface defects on hulls.

White, easy to apply sealant that is used fo sealing interior and exterior autobody joints and seams. Applies easily and can be smoothed to a featheredge with a wet finger and sets to a firm, tough, rubber-like water resistant bead.

Non-hardening, pliable, water-resistant, medium-bodied sealer for sealing auto seams and between windshield rubber and car body. Can be used as a supplementary sealer for auto glass installation.

Two-part urethane adhesive that is used to bond sheet metal door skins without welding. This product eliminates warpage and corrosion normally caused by welding.

A flexible T.P.O. patch that is used to provide a strong backside reinforcement repair for most plastics.

Two-part epoxy used to repair most flexible plastic parts, including bumper covers and other plastic body panels. This product should NOT be used with SMC/fiberglass. This product is easy sanding and formulated for excellent featheredge.

Two-part, clear epoxy that delivers strong, durable bonds within minutes after application. Makes difficult repair jobs easy when used to join parts made of plastic, metal, glass, fiberglass, wood, etc.

Used to dispense 3M™ Automix™ Fast Cure Epoxy 08701 and 3M™ Automix™ Channel Bonding and Sidelite Adhesive 08641. Requires 3M™ Mixing Nozzel 08197.

Two-part epoxy for use in vertical or horizontal seams to match OEM sealers. Non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime, 10 minutes. No shrinkage or cracking.

Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins.

Two-part epoxy designed for roof ditches (door skin hem flanges) and rear body panels, including tail light areas, wheel well flanges, etc. Has a work time of approximately 15 minutes and can be painted in 30 minutes increasing productivity.

Two-part urethane adhesive that is used to bond SMC and FRP ( traditional fiberglass) body panels to each other and to metal frames.

3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.

3M™ Automotive Acrylic Plus Attachemnt Tape 06383 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.

3M™ Automotive Acrylic Plus Attachment Tape 06384 is a .045-inch thick, medium-density black foam tape with high performance acrylic adhesives on both sides and a red release liner.

3M™ Automotive Attachment Tape 06380 is a .045-inch thick, medium-density white acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.

Black, rubberized, protective coating developed primarily for use as a sound deadener, protective coating, and underseal. Bonds to a wide variety of surfaces. Use with applicator gun, part number 08997.

Designed to seal sheet metal overlap joints that have been spotwelded, riveted, or bolted together. Can be painted when dry. Remains flexible and resistes oil, fuel and other automotive fluids.

For use with 3M 1/10 gallon cartridge adhesives and sealants.

Clear, fast drying, sealant that stays flexible and is color stable. This product is used for sealing leaks in windshields, backlites, reveal moldings, truck ornaments, taillights and other small seams on the auto body.

A tank additive that cleans fuel injectors, intake valves, and combustion chambers. Improves fuel economy and power. Removes carbon, gums, resins and varnish. For gasoline engines only.

Creme hardening agent designed to be used with 3M™ Zebra Fillers, part number 05868, 05870 and 05871 and 3M™ Piranna Putty 05821.

Red creme hardening agent designed to be used with all 3M™ Body Repair Fillers, Fiberglass Reinforced Fillers, and Finishing Putties. Creamy consistency mixes easily and quickly.

Urethane plastic repair material for repairing damaged bumpers and re-building tabs. Can also be used to bond many dissimilar materials such as plastic, fiberglass and metal.

Laminate of structural gauze and plastic release film. Used for reinforcing the backside of plastic repairs. Release film protects your hand from contact with wet Duramix®.

20-second set urethane adhesive that replaces cyanoacrylates. Will not crack or become brittle like cyanoacrylates. Bonds to virtually any substrate and has excellent gap-filling capabilities for bonding small parts. Excellent for rebuilding cracked eyelets and broken tabs.

Firm setting product for sealing interior and exterior joints. Adheres well to clean, bare metal, primed metal and paint surfaces. Skins over quickly. Low shrinkage. Can be painted within 30 minutes. Excellent tooling and sanding properties.

Extremely fast drying, non-staining, amber adhesive for bonding trim fabric, upholstery cloth, floor mats and carpeting to bare metal and KB board. Also useful as a gasket adhesive to hold gaskets in place while assembling parts.

Specially formulated to allow multiple disc applications without adhesive buildup or paper delamination. Discs remove easily and cleanly.

Designed to be used with 3M™ Fiberglass Cloth (PN 05838) and/or 3M™ Fiberglass Mat(PN 05833) to patch holes in metal, and cracks, tears, punctures and splits in fiberglass panels.

3M™ Fiberglass Resin is designed to be used with 3M™ Fiberglass Cloth (PN 05838) and/or 3M™ Fiberglass Mat (PN 05833) to patch holes in metal, and cracks, tears, punctures and splits in fiberglass panels.

Fully enclosed, all metal, rod driven, friction feed applicator gun for use with 3M™ Windshield Urethanes, Urethane and MSP Seam Sealers in 310 mL or smaller flexible foil packages. This tool has a 12:1 ratio.

High solids clear joint and seam sealer designed to seal interior and exterior joints and seams. Adheres well to clean, bare metal, primed metal and painted surfaces. Clear, non-yellowing. Excellent tooling properties.

A fast-acting, general purpose engine degreaser designed to remove grease, grime and dirt. It is safe for most under-the-hood rubber and plastic parts.

General purpose aerosol degreaser. Removes grease, dirt, grime from engines. Safe for under-the-hood rubber and plastic parts.

Basic assortment of adaptors designed to enable a shop to perform fuel system cleanings.

Assortment of adaptors designed to enable a shop to deliver 3M™ Fuel System Cleaner 08913-08955 and 3M™ Fuel Injector Cleaner 08912-08956 to 85%-90% of the fuel injected cars on the road today.

Specially blended solvent which provides easy cleanup of most types of adhesives, bugs, greases and oils, overspray, silicone, waxes and tars.

Specially blended solvent which provides easy cleanup of most types of adhesives, bugs, greases and oils, overspray, silicone, waxes and tars.

Low VOC, clear, high strength adhesive for bonding automotive materials such as carpeting, jute pads, fabrics and plastics to metal and other surfaces. Has good heat and water resistance.

Low VOC, clear, high strength adhesive for bonding automotive materials such as carpeting, jute pads, fabrics and plastics to metal and other surfaces. Has good heat and water resistance.

An aerosol cleaner for all glass surfaces including windows, windshields, mirrors, and side glass. May also be used to clean automotive vinyl, interior plastic and clear plastic. 3M™ Glass Cleaner is non-flammable, and will not affect painted surfaces.

Low VOC general purpose degreaser designed to remove oil, grease, brake fluid and other contaminants from all types of brake assemblies. Leaves no residue and helps eliminate disc brake squeal and chatter. Formula contains less than 45% VOC.

High power general purpose degreaser designed to remove oil, grease, brake fluid and other contaminants from all types of brake assemblies. Leaves no residue and helps eliminate disc brake squeal and chatter. NOT FOR SALE IN CALIFORNIA.

Recommended for use by hand to increase surface gloss and to clean up spatter or residue after machine glazing all types of refinish or factory applied automotive paints. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface.

Tank additive. Clean fuel injectors and removes deposits during the time it takes to consume one tank of gas. Restores power and fuel economy. Eliminates stalling, hesitation and poor performance due to dirty fuel injectors.

A tank additive that cleans fuel injectors and intake valves. Improves fuel economy and power. Cleans gums, resins, varnishes. For gasoline engines only.

Fast acting liquid hardening agent designed to be used with 3M™ Fiberglass Resin (PNs 05833 and 05834).

Specialized formula for general or all-around use. Provides characteristics of a lubricating oil, a penetrating oil, a demoisturizing coating, a thin bodied, transparent rust preventative coating in aerosol form.

Superior performing, paintable, rubberized undercoating with excellent coverage and corrosion protection, while also meeting the low VOC requirements in most areas. Use with 3M™ No Cleanup Applicator Gun (Part number 08801).

Superior performing, paintable, rubberized undercoating with excellent coverage and corrosion protection, while also meeting the low VOC requirements in most areas. Use with 3M™ No Cleanup Applicator Gun 08801.

An oil additive that improves fuel economy and power. Contains a unique friction modifer. Reduces friction, and engine wear while reducing build up of harmful deposits. Compatible with all types of motor oil. Add during oil change, or as a top off between oil changes.

Uniquely formulated to remove compound swirl marks. Contains no waxes or silicones. Best for dark colored paint finishes. Less clean up required.

Specially designed medium cutting, paste compound for removing 1200, 1500, and 2000 color sanding scratches in automotive paints including clear coats.

Strong, quick-drying adhesive can be used for bonding plastic or metal emblems, interior rigid plastic, tail light lenses, vinyl side moldings or upholstery.

Premium lightweight body filler for filling low areas in damaged automotive sheet metal. Builds adhesion faster than other 3M™ Fillers. Contains zinc complex. Tack-free and stain-resistant.

3M™ Professional Grade Rubberized Undercoating is an easy to use black protective coating that does not run when applied, provides anti corrosive protection, sound deadening and insulation to cars, trucks and recreational vehicles.

Has good adhesion to rubber weatherstripping, vinyl, metal, glass, side moldings, emblems, trim pieces, and most plastics. Excellant resistance to temperature extremes, shock, and most automotive and marine fluids.

Fast drying, tintable, paintable, chip resistant coating for use on motor vehicles; resists weathering, salt spray, and abrasion. Texture is coarse. Use with applicator gun, part number 08997.

Backup pad designed to support 3M™ Roloc™ 3 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.

Backup pad designed to support 3M™ Roloc™ 2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.

Backup pad designed to support 3M™ Roloc™ 2 inch diameter abrasive discs. This pad has a 1/4-20 INT thread which allows it to be mounted directly to tools with 1/4-20 EXT threaded shafts or use with Roloc™ shank to fit collet chuck tools.

Contains chopped fiberglass. Repairs holes, cracks and tears in fiberglass. Repairs holes in metal. Smooth spreading. Waterproof. Can be used with 3M™ Fiberglass Mat or Cloth material, part numbers 05837 and 05838.

Contains chopped fiberglass. Repairs holes, cracks and tears in fiberglass. Repairs holes in metal. Smooth spreading. Waterproof. Can be used with 3M™ Fiberglass Mat or Cloth material, part numbers 05837 and 05838.

High quality silicone lubricant which eliminates rubber squeaks, prevents sticking and seals out moisture. This product contains no petroleum oils to stain fabrics and will not freeze at -28 degrees F nor degrade at +350 degrees F.

A high solids, high viscosity aerosol lubricant designed for lubricating moving parts, eliminating squeaks caused by friction; protecting against rust and corrosion; sealing out moisture; preserving plastics, rubber, leather; etc.

A non-melting, water resistant, 100% solids, silicone compound designed to protect surfaces from oxidation. Also used as a general purpose lubricant for brakes (metal to rubber applications); great for O rings and weatherstripping.

3M™ Spot Sanding Pens powerful glass fibers thoroughly clean each corner, crevice and pocket, removing rust, wax and dirt.

Clear, flowable, high-performance, general purpose grease that sprays out as a liquid and then sets up to a uniform coating of grease in a few minutes. Designed to be water resistant and can lubricate a variety of items such as hinges, latches and seat tr

Clear adhesive that is used for attaching lightweight trim material such as upholstery cloth and trunk liners to metal and other surfaces. May be used to bond styrofoam. Ideal for position bonding applications where mechanical fasteners will be used.

Soft non-hardening caulking material in one foot lengths for use in all types of seams, joints and openings. This product is easily thumbed into place and smoothed with a finger. It may be painted immediately.

Two part general purpose gray structural adhesive that may be used for bonding metal, glass and plastic. This product can be used for trim, fiberglass, and flexible body parts repair.

3M™ Super Red Putty is an excellent glazing putty, easy to spread and self-leveling. A nitrocellulose putty with long working time and minimal shrinkage. Feathers out to a smooth surface. Sands easily even after overnight drying.

A paste-like, one-component clear material which cures to a tough, rubbery solid when exposed to moisture in the air. It will adhere to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics.

A paste-like, one-component black material which cures to a tough, rubbery solid when exposed to moisture in the air. It will adhere to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics.

A paste-like, one-component clear material which cures to a tough, rubbery solid when exposed to moisture in the air. It will adhere to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics.

A paste-like, one-component black material which cures to a tough, rubbery solid when exposed to moisture in the air. It will adhere to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics.

Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed.

A strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variations. It can be used to bond automotive weatherstripping and is a great adhesive for holding paper, cork, or rubber gaskets in place during installation.

A strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. Excellent adhesive for holding paper, cork, or rubber gaskets in place during installation.

A strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. Excellent adhesive for holding paper, cork, or rubber gaskets in place during installation.

A transmission conditioner that improves shifting and drivability, reduces metal wear, conditions seals and reduces formation of sludge and varnish. Add to the top of existing tranmission fluid, or add to new fluid.

Tan heavy bodied seam sealer. Quick skinning, fast curing, flexible sealer. Can be used wherever heavy bodied seam sealers are needed. High solids and low shrinkage. Ideal seam sealer where time and speed are important. Paintable in 45 min.

Clear heavy bodied seam sealer. Quick skinning, fast curing, flexible sealer. Can be used wherever heavy bodied seam sealers are needed. High solids and low shrinkage. Ideal seam sealer where time and speed are important. Paintable in 45 min.

High quality, heavy-bodied, general purpose, moisture-curing seam sealers that are designed for interior and exterior body joints. Adheres well to primed surfaces except acrylic lacquer.

High solids seam sealer ideal for sealing interior and exterior automotive and RV seams and joints. Adheres well to primed metal and painted surfaces. Can be smoothed to a featheredge and/or brushed. Tack free and paintable in 30 minutes.

High solids seam sealer ideal for sealing interior and exterior automotive and RV seams and joints. Adheres well to primed metal and painted surfaces. Can be smoothed to a featheredge and/or brushed. Tack free and paintable in 30 minutes.

Black, multi-purpose, low cost, aerosol undercoating. Specifically used for undercarriages, wheel wells, frame rails, and fenders. Designed to protect metal from corrosion and abrasion. Can also be used as a sound dampening coating.

Rapid drying, rubberized undercoating material for rust-proofing and sound deadening. Ideal for coating fenders, quarter panels, door panels, repaired sections, welded joints, hoods, and decks.

A black, fast-drying adhesive used for bonding and sealing automotive weatherstripping. Designed to affix EPDM rubber. Remains flexible and waterproof.

A heavy-bodied, lithium grease based, aerosol lubricant. It provides good performance under high friction loads, rubbing, and wiping action. It is excellent for general applications on all metal moving parts.

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

Bulk packed version of part number 08611. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. One 15 foot roll is sufficient material to replace one windshield or backlite.

Bulk packed version of part number 08612. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. One 15 foot roll is sufficient material to replace one windshield or backlite.

One part moisture curing urethane adhesive that bonds auto replacement glass to car bodies.

Cleans off adhesive residue after woodgrain vinyl or vinyl stripes have been removed. Fast-acting remover can be used on all acrylic enamel painted metal surfaces.

Cleans off adhesive residue after woodgrain vinyl or vinyl stripes have been removed. Fast-acting remover can be used on all acrylic enamel painted metal surfaces.

For removing woodgrain vinyl and vinyl stripes from acrylic enamel surfaces. Jelly-like consistency keeps remover in place on vertical surfaces to promote fast action when sprayed from the aerosol can.

For removing woodgrain vinyl and vinyl stripes from acrylic enamel surfaces. Jelly-like consistency keeps remover in place on vertical surfaces to promote fast action when sprayed from the aerosol can.