|
|
Make a Selection
|
|
|
3M™ Between Coats Finishing Disc, 20 in, 10 pk, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Floor Surfacing Discs 00407, 7 in x .3125 in, 150 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00428, 6.875 in x .875 in, 100 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00429, 6.875 in x .875 in, 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00430, 6.875 in x .875 in, 300 cs 60 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00431, 6.875 in x .875 in, 300 cs 50 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00438, 20 Grit, 16 in x 2 in, 25 case
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00632, 6 in x .3125 in, 100 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00633, 6 in x .3125 in, 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 00634, 6 in x .3125, 60 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 02546, 19 in x 2 in, 50 cs 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 02548, 19 in x 2 in, 25 cs 20 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 02617, 7 in x .875 in, 300 cs 150 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 03596, 7 in x .875 in, 60 Grit
A general purpose floor abrasive disc.
|
|
|
3M™ Floor Surfacing Discs 03598, 7 in x .875 in, 36 Grit
A general purpose floor abrasive disc.
|
|
|
3M™ Floor Surfacing Discs 04090, 7 in x .875 in, 120 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 06959, 5 in x .25 in, 6 Slots .5 in length 20 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 06963, 7 in x .3125 in, 120 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07925, 7 in x .875 in, 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07926, 7 in x .875 in, 30 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07936, 7 in x .875 in, 24 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07939, 7 in x .875 in, 40 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07941, 7 in x .3125 in, 24 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07942, 7 in x .3125 in, 30 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07943, 7 in x .3125 in, 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 07944, 7 in x .3125 in, 40 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 09181, 16 in x 2 in, 50 cs 120 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 09188, 36 Grit, 6 in x .3125 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20550, 20 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20954, 100 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20955, 80 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20956, 60 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20957, 16 in x 2 in, 50 cs 100 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20958, 16 in x 2 in, 50 cs 80 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20960, 16 in x 2 in, 50 cs 50 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20961, 16 in x 2 in, 50 cs 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20962, 16 in x 2 in, 50 cs 30 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20969, 100 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20971, 80 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20973, 60 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20978, 15 in x 2 in, 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20982, 100 Grit, 7 in x .875 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20983, 80 Grit, 7 in x .875 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20984, 60 Grit, 7 in x .875 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20985, 50 Grit, 7 in x in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20992, 100 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20993, 80 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20994, 60 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 20995, 50 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21016, 100 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21017, 80 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21018, 60 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21019, 50 Grit, 5 in x 1/4 in,
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21021, 5 in x .25 in, 6 Slots .5 in length 36 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21027, 16 Grit, 16 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21028, 12 Grit, 16 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21034, 16 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21035, 12 Grit, 15 in x 2 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21037, 16 Grit, 7 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21038, 12 Grit, 7 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21040, 16 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21041, 12 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21043, 16 Grit, 5 in x 1/4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 21640, 7 in x .875 in, 200 cs 20 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 22162, 20 Grit, 7 in x 5/16 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 22164, 20 Grit, 16 in x 4 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 88526, 16 Grit, 6 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 88527, 16 in x 2 in, 50 cs 60 Grit
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
|
3M™ Floor Surfacing Discs 88528, 36 Grit, 6-7/8 in x 7/8 in
3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
|
|
3M™ Floor Surfacing Paper Sheets 06974, 8 in x 19.906 in, 100 Grit
3M™ Floor Surfacing Sheets with paper backing are an excellent tool for finishing or resurfacing floors. Sheets are cut to meet manufacturer machine specifications. They have many applications, including do-it-yourself (DIY) and rental.
|
|
|
3M™ Floor Surfacing Paper Sheets 06975, 8 in x 19.906 in, 80 Grit
3M™ Floor Surfacing Sheets with paper backing are an excellent tool for finishing or resurfacing floors. Sheets are cut to meet manufacturer machine specifications. They have many applications, including do-it-yourself (DIY) and rental.
|
|
|
3M™ Floor Surfacing Paper Sheets 06976, 8 in x 19.906 in, 60 Grit
3M™ Floor Surfacing Sheets with paper backing are an excellent tool for finishing or resurfacing floors. Sheets are cut to meet manufacturer machine specifications. They have many applications, including do-it-yourself (DIY) and rental.
|
|
|
3M™ Floor Surfacing Paper Sheets 06979, 8 in x 19.906 in, 20 Grit
3M™ Floor Surfacing Sheets with paper backing are an excellent tool for finishing or resurfacing floors. Sheets are cut to meet manufacturer machine specifications. They have many applications, including do-it-yourself (DIY) and rental.
|
|
|
3M™ Floor Surfacing Rolls 00160, 120 Grit, 12 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 00161, 150 Grit, 12 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 00405, 8 in x 50 yd, 120 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 00406, 8 in x 50 yd, 150 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07921, 8 in x 50 yd, 36 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07922, 8 in x 50 yd, 30 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
3M™ Floor Surfacing Rolls 07923, 12 in x 50 yd, 36 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07924, 12 in x 50 yd, 30 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07934, 8 in x 50 yd, 24 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07935, 12 in x 50 yd, 24 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07937, 12 in x 50 yd, 40 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 07938, 8 in x 50 yd, 40 Grit
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15287, 100 Grit, 12 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15288, 80 Grit, 12 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15289, 60 Grit, 12 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15290, 50 Grit, 12 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15299, 100 Grit, 8 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15300, 80 Grit, 8 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15301, 60 Grit, 8 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Rolls 15302, 50 Grit, 8 in x 50 yd
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
3M™ Floor Surfacing Sheets 12005, 12 in x 26.875 in, K9 36 Grit
3M™ Resinite™ Floor Surfacing Sheets for commercial and residential jobs. For general sanding, especially gummy finish removal. Durable mineral on tough, flexible paper or combination backing. Fast cuts, better finish, longer life and saves time.
|
|
|
3M™ Floor Surfacing Sheets 12012, 8 in x 26.125 in, K16 80-1/0 Grit
3M™ Resinite™ Floor Surfacing Sheets for commercial and residential jobs. For general sanding, especially gummy finish removal. Durable mineral on tough, flexible paper or combination backing. Fast cuts, better finish, longer life and saves time.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00512, 6 in, 80E, 25 discs per box, 5 boxes per case
Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pad 05776.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00513, 6 in, 60E, 25 discs per box, 5 boxes per case
Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pad 05776.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00515, 6 in, 40E, 25 discs per box, 5 boxes per case
Used for stripping paint to metal, shaping and sanding plastic filler. Suggested backup pad 05776.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00516, 6 in, 36E, 25 discs per box, 5 boxes per case
Used for stripping paint to metal, shaping and sanding plastic filler. Suggested backup pad 05776.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00520, 8 in, 100E, 25 discs per box, 5 boxes per case
Used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pads 05768 and 05779.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00521, 8 in, 80E, 25 discs per box, 5 boxes per case
Used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pads 05768 and 05779.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00522, 8 in, 60E, 25 discs per box, 5 boxes per case
Used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pads 05768 and 05779.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00524, 8 in, 40E, 25 discs per box, 5 boxes per case
Usd for stripping paint to metal, shaping and sanding plastic filler. Suggested backup pads 05768 and 05779.
|
|
3M™ Green Corps™ Hookit™ Regalite™ Disc, 00525, 8 in, 36E, 25 discs per box, 5 boxes per case
Use for stripping paint to metal, shaping and sanding plastic filler. Suggested backup pads 05768 and 05779.
|
|
3M™ Regalite™ Floor Surfacing Belts 09225 7-7/8 in x 39-3/8 in, 964F, 36YH
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Regalite™ Floor Surfacing Belts 09227 7-7/8 in x 39-3/8 in, 964F, 50Y
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Regalite™ Floor Surfacing Belts 09229 7-7/8 in x 39-3/8 in, 761D, 80Y
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Regalite™ Floor Surfacing Belts 09232, 36Y Grit, 7-7/8 in x 29-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Ywt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts 09233, 40Y Grit, 7-7/8 in x 29-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Ywt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts 09248 7-7/8 in x 33 in, 761D, 80Y
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Regalite™ Floor Surfacing Belts, 36Y Grit, 9-7/8 in x 29-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Y-wt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts, 36Y Grit, 11-7/8 in x 29-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Y-wt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts, 36Y Grit, 11-7/8 in x 31-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Y-wt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts, 40Y Grit, 9-7/8 in x 29-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Ywt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts, 40Y Grit, 11-7/8 in x 29-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Y-wt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Belts, 40Y Grit, 11-7/8 in x 31-1/2 in
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral blend, 761D. Durable Ywt cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09270, 7 in x 7/8 in, 752I, 36 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09271, 7 in x 7/8 in, 752I, 40 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09272, 7 in x 7/8 in, 752I, 50 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09273, 7 in x 7/8 in, 752I, 60 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09274, 7 in x 7/8 in, 752I, P80 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09275, 7 in x 7/8 in, 752I, P100 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09276, 7 in x 5/16 in, 752I, 36 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09277, 7 in x 5/16 in, 752I, 40 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09278, 7 in x 5/16 in, 752I, 50 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09279, 7 in x 5/16 in, 752I, 60 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09298, 7 in x 5/16 in, 752I, P80 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09299, 7 in x 5/16 in, 752I, P100 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09300, 6-7/8 in x 7/8 in, 752I, 36 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09301, 6-7/8 in x 7/8 in, 752I, 40 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09302, 6-7/8 in x 7/8 in, 752I, 50 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09303, 6-7/8 in x 7/8 in, 752I, 60 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09304, 6-7/8 in x 7/8 in, 752I, P80 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09305, 6-7/8 in x 7/8 in, 752I, P100 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09306, 7 in x 7/8 in, 752I, P120 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09307, 7 in x 5/16 in, 752I, P120 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Discs 09308, 6-7/8 in x 7/8 in, 752I, P120 Grit, 200/case
3M™ floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite™ mineral, and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09309 8 in x 50 yd 752I, 36 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09310, 8 in x 50 yd, 752I, 40 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09311, 8 in x 50 yd, 752I, 50 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09312, 8 in x 50 yd, 752I, 60 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09313, 8 in x 50 yd, 752I, P80 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09314, 8 in x 50 yd, 752I, P100 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09315, 8 in x 50 yd, 752I, P120 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09316 12 in x 50 yd 752I, 36 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09317, 12 in x 50 yd, 752I, 40 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09318,12 in x 50 yd, 752I, 50 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09319, 12 in x 50 yd, 752I, 60 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09320, 12 in x 50 yd, 752I, P80 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09321, 12 in x 50 yd, 752I, P100 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Floor Surfacing Rolls 09322, 12 in x 50 yd, 752I, P120 Grit
3M™ Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite™ mineral and tough paper backing.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 04145, 7.875 in x 29.5 in 50Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 04146, 7.875 in x 29.5 in 60Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 04147, 7.875 in x 29.5 in 80Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 04148, 7.875 in x 29.5 in P100Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 04149, 7.875 in x 29.5 in P120Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08018, 11.875 in x 31.5 in 50Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08019, 11.875 in x 31.5 in 60Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08020, 11.875 in x 31.5 in 80Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08021, 11.875 in x 31.5 in P100Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08024, 11.875 in x 29.5 in 50Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08025, 11.875 in x 29.5 in 60Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08026, 11.875 in x 29.5 in 80Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08027, 11.875 in x 29.5 in P100Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08030, 9.875 in x 29.5 in 50Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08031, 9.875 in x 29.5 in 60Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08032, 9.875 in x 29.5 in 80Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belt 08033, 9.875 in x 29.5 in P100Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 04144, 3M964F, 7.875 in x 29.5 in, 40YF Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 04153, 3M964F, 7.875 in x 29.5 in, 36YF Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 09179, 3M761D, 9.875 in x 29.5 in 150Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 09180, 3M761D, 9.875 in x 29.5 in 120Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 09184, 3M761D, 11.875 in x 29.5 in 120Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 09185, 3M761D, 11.875 in x 29.5 in 150Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Belts 09187, 3M761D, 11.875 in x 31.5 in 150Y Grit
Tough, aggressive belt. Best productivity and value on bare wood or nongummy finishes. Cuts faster, runs cooler. Features 3M™ Cubitron™ ceramic aluminum oxide mineral. Extra-durable cloth backing. Non-directional splice.
|
|
|
3M™ Regalite™ Resin Bond Cloth Roll 04175, 3M761D, 12 in x 25 yd, 100Y Grit
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Regalite™ Resin Bond Cloth Roll 04177, 3M761D, 12 in x 25 yd, 60Y Grit
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Regalite™ Resin Bond Cloth Roll 04186, 3M964F, 8 in x 25 yd, 40 Grit
3M™ Regalite™ Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 13 in, 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 16 in, BCP 16 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 17 in, 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Between Coats Disc 8447, 19 in, 10 cs, Maroon Very Fine
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
|
|
|
3M™ Scotch-Brite™ Driving Pad DP16 , 16 in , White, 5/case
Scotch-Brite™ Driving Pad, DP16 , 16 in , White, 5/case
|
|
|
3M™ Scotch-Brite™ Edger Disc Pad 03647, 7 in x .875 in
Scotch-Brite™ Edger Disc Pads support 3M™ Edger Sanding Screens or Discs creating a flexible sanding system. Adapts to contoured surfaces. Smooths out swirl or gouge marks. Durable nylon and polyester fibers. Reusable. Clean by shaking or rinsing.
|
|
3M™ Scotch-Brite™ Edger Disc Pad 03648, 7 in x .3125 in
Scotch-Brite™ Edger Disc Pads support 3M™ Edger Sanding Screens or Discs creating a flexible sanding system. Adapts to contoured surfaces. Smooths out swirl or gouge marks. Durable nylon and polyester fibers. Reusable. Clean by shaking or rinsing.
|
|
|
3M™ Scotch-Brite™ Edger Disc Pad 07961, 8 in x 2.75 in
Scotch-Brite™ Edger Disc Pads support 3M™ Edger Sanding Screens or Discs creating a flexible sanding system. Adapts to contoured surfaces. Smooths out swirl or gouge marks. Durable nylon and polyester fibers. Reusable. Clean by shaking or rinsing.
|
|
|
3M™ Scotch-Brite™ Edger Disc Pad 09152, 6.875 in x .3125 in
3M™ Scotch-Brite™ Edger Disc Pad 09152, 6.875 in x .3125 in
|
|
|
3M™ Scotch-Brite™ Edger Disc Pad 09153, 6.875 in x .785 in
Scotch-Brite™ Edger Disc Pads support 3M™ Edger Sanding Screens or Discs creating a flexible sanding system. Adapts to contoured surfaces. Smooths out swirl or gouge marks. Durable nylon and polyester fibers. Reusable. Clean by shaking or rinsing.
|
|
|
3M™ Three-M-ite™ Floor Surfacing PSA Roll 07923, 12 in x 50 yd, 1 cs, P36
3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
|
|
|
Highland™ Stikit™ Floor Surfacing Paper Sheets 04205, 12 in x 18 in, 20 cs 36 Grit
Highland™ Stikit™ Floor Surfacing Abrasive Sheets are coated on heavyweight paper or combination backings. 3M adhesive technology on the backside. Easy-to-use on rectangular floor sheet sanding machines. Adhesive prevents slippage from driving pad.
|
|
Highland™ Stikit™ Floor Surfacing Paper Sheets 04209, 12 in x 18 in Sheet, 100 Grit
Highland™ Stikit™ Floor Surfacing Abrasive Sheets are coated on heavyweight paper or combination backings. 3M adhesive technology on the backside. Easy-to-use on rectangular floor sheet sanding machines. Adhesive prevents slippage from driving pad.
|
|
Printer-friendly format